Chassis brace (diagonal strut) removal/install
Thread Starter
Junior Member
Joined: Jun 2022
Posts: 53
Likes: 5
AMG GTR
Chassis brace (diagonal strut) removal/install
Hello, I have a question regarding the attached installation procedure for the diagonal strut:
Installation: Tighten bolts (9) only when the
vehicle is in ready-to-drive condition (e. g. on
four-column-vehicle lift).
If the correct understanding that 4 wheels must be on the ground (suspension loaded) before it can be tightened to spec?
If so, any idea on how to accomplish this? The car is very low and I don't see how I can reach the center of the car and tighten those bolts without a jack.
Thanks!
Installation: Tighten bolts (9) only when the
vehicle is in ready-to-drive condition (e. g. on
four-column-vehicle lift).
If the correct understanding that 4 wheels must be on the ground (suspension loaded) before it can be tightened to spec?
If so, any idea on how to accomplish this? The car is very low and I don't see how I can reach the center of the car and tighten those bolts without a jack.
Thanks!
Member
Joined: Dec 2015
Posts: 84
Likes: 46
From: NC,SC and VA.
2023 G550, 2020 AMG GTR, 2014 S550, 2024 Denali 3500, 2023 Porsche GT3
