Nick@autogeek

One of the most frequent questions people have regarding detailing clay is how often can you use it? Quite a few factors come in to play, such as vehicle condition, size of clay bar, etc. If you clay a vehicle that's been sitting outside for fifteen years and has never been clayed, you can count on using at least one 50-100 gram clay bar. That's if you want to ensure you don't reintroduce any embedded contaminants in the clay back onto the paint, possibly scratching or marring the finish. If you're claying your vehicle, you're on the right track to silky smooth paint and the last thing you want to do is not work smart and damage the finish that you're trying to inject some life in to.

I'm a big fan of Pinnacle's XMT Speed Clay because it's large (over 200 grams!) and very easy to use. For the size and the quality of the bar, it's a heck of a bargain at 20 bucks. The XMT Speed Clay is large enough to break in to three or four smaller pieces so you can store the rest for later. This enables you to maximize your investment and get the most out of your clay bar. But what if you want to take it a step farther? We all like to get the most out of our detailing supplies and thanks to one product in particular, this is certainly possible with your detailing clay.






Blackfire Clay Cleaner & Extender takes working clean to the next level. Even after you fold and re knead a clay bar several times, there is still a good chance you will re-introduce embedded contaminants in the clay bar back onto the vehicle's finish. With Blackfire Clay Cleaner & Extender, you can now clean the majority of the contaminants in your clay bar to ensure you don't scratch or mar the finish in the future.

First you want to make sure you're working over a bucket or sink. Spray the clay bar with the Blackfire Clay Cleaner & Extender.






Blackfire Clay Cleaner & Extender features special surfactants that will effectively clean the clay bar, but will not dry it out. Rub your fingers over the clay bar. This will help loosen any contaminants in the bar.






Blackfire Clay Cleaner & Extender starts working immediately. Now can you imagine having all that dirt and gunk trapped in the clay bar before storing it for future use?






Rinse the bar with stream of water after agitating it with your fingers. Another option is to place the clay in a bucket of water.






Blackfire Clay Cleaner & Extender leaves detailing clay looking new and ready for the next job!






As you normally would, spray the clay bar with the proper lubricant before storing it for future use.






Whether you're a professional detailer with pounds of detailing in your arsenal or just an enthusiast that likes to get the most out of your products, Blackfire Clay Cleaner & Extender takes detailing clay to next level.


Blackfire Clay Cleaner & Extender