Buying a 96 or newer- Code access
#1
Junior Member
Thread Starter
Join Date: Nov 2003
Location: PA/NJ
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
1996 E300 Black/Grey and Rust :(
Buying a 96 or newer- Code access
This may drop your price - find the problems before you buy
OBD Access
+ Start car
+ Hold REST button for more than 5 seconds
+ Scroll trhough using LEFT and RIGHT AUTO buttons
Error Code Access
* Turn off the car
* Start the car
* Set left temp to HI and right temp to LO
* Within 20 seconds press REST and EC simultaneously for more than 5 seconds until the recirculate button flashes and the display indicates "di R"
* Press the AUTO button to cycle through the codes (like you did earlier with the sensor values)
* The letter E (for error) is displayed on the left side and the specific fault code number is shown on the left
OBD Access
+ Start car
+ Hold REST button for more than 5 seconds
+ Scroll trhough using LEFT and RIGHT AUTO buttons
Error Code Access
* Turn off the car
* Start the car
* Set left temp to HI and right temp to LO
* Within 20 seconds press REST and EC simultaneously for more than 5 seconds until the recirculate button flashes and the display indicates "di R"
* Press the AUTO button to cycle through the codes (like you did earlier with the sensor values)
* The letter E (for error) is displayed on the left side and the specific fault code number is shown on the left