Diesel Forum Forum for Diesel engine vehicle related discussion
Sponsored by:
Sponsored by:

Screen Data Question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Oct 1, 2013 | 03:18 PM
  #1  
mtrevelino's Avatar
Thread Starter
Super Member
 
Joined: Jan 2010
Posts: 563
Likes: 31
From: The Villages, Florida
2006 E320 CDI
Screen Data Question

I had to clear my service C reminder. After I finished this I went to the battery voltage screen and started my car to run some errands. While driving, I hit the up/down arrow. The next screen showed the following information:

I/C S/W 2605
Version 0095
I/C H/W 4105
I/C P/N:
A211 540 29 48
Oil Level: 6.0 qts
OM613DE32LA

Does anyone know if I am anywhere near the latest S/W and H/W versions of software?
The oil level read anywhere from 3.9 to 7.8 qts. The lower number would show when I came to a stop, and increase as I sped up.

Also, the next screen showed the following:

ESP Dynameter Test
on
Circuit 15 OFF

I assume circuit 15 should be off?

Thanks for any input.
Mike T.
Circuit 15 off was highlighted on my vehicle.
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:55 AM.