ML 270 cdi...fuel lines
12-28-2016, 11:28 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Lake Taupo NZ
Posts: 20
Received 0 Likes
on
0 Posts
2000 ML 270cdi
ML 270 cdi...fuel lines
Looking for fuel lines for my ML TYP210 part #249 ...I have broken the nipple off connector into fuel pump above water pump...
Has anyone found a glue that holds tight with diesel ?? Thinking "Supa glue" but don't want to bugger it if wrong type ...not sure of the type of plastic but very brittle now ...Cheers
Has anyone found a glue that holds tight with diesel ?? Thinking "Supa glue" but don't want to bugger it if wrong type ...not sure of the type of plastic but very brittle now ...Cheers
12-29-2016, 10:38 AM
#2
Out Of Control!!
Yep there is an ole polak at Ben's Wurld who always suggests gorilla glue and a condom for your type situation---however others will say purchase a replacement part and join the real world!
12-29-2016, 04:07 PM
#3
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Lake Taupo NZ
Posts: 20
Received 0 Likes
on
0 Posts
2000 ML 270cdi
We kiwi's don't have condoms that small lol...to glue was a temporary fix until I can find a company that has aftermarket fuel lines as only OEM ex Germany...takes 10 days Cheers
12-29-2016, 07:33 PM
#4
MBWorld Fanatic!
Try Araldite 5 minute.
If it doesn't work what have you lost.
I like the condom comment , classic.
If it doesn't work what have you lost.
I like the condom comment , classic.
The following users liked this post:
Steviemboy (12-30-2016)
12-30-2016, 01:17 AM
#5
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Lake Taupo NZ
Posts: 20
Received 0 Likes
on
0 Posts
2000 ML 270cdi
Thanks Carsy,
A boat shop suggested Loctite 406 to glue hard to stick items ...but sold out here.. plus its $45 a tube ... only need a spot of it ...cheers
A boat shop suggested Loctite 406 to glue hard to stick items ...but sold out here.. plus its $45 a tube ... only need a spot of it ...cheers
