E320 V6 cdi Tuning (T-Rex)
 

Hello,

I started tuning an S211 E320 Cdi 4Matic Evo and I would like to show it to someone who is interested .. more soon...:naughty:

https://cimg2.ibsrv.net/gimg/www.mbw...ff971c2d37.jpg
https://cimg7.ibsrv.net/gimg/www.mbw...5f699c5169.jpg
First of all, some pictures of the car...

How do we know it is diesel?

Why not tell the truth?But here's the evidence .. Sorry bad Englis.. more pictures coming soon......
https://cimg2.ibsrv.net/gimg/www.mbw...852af979a5.jpg
https://cimg9.ibsrv.net/gimg/www.mbw...9de948bcdf.jpg

https://cimg8.ibsrv.net/gimg/www.mbw...edb2fdd92c.jpghttps://cimg3.ibsrv.net/gimg/www.mbw...09970795f5.jpg
The car was engine failure, so it is possible to open a full rebuild...

Dude, nice photos but what is your point - are you asking us something or?

He clearly says "I would like to show it to someone who is interested", I believe the gentleman is simply posting a build thread.

Good luck with the build!

OK I see what you mean.

I would definitely like to learn more about his project, which looks like W211 Wagon 4Matic with a damaged V6 Diesel engine. (I did not know they made W211 models with 4Matic and V6 Diesel engine - inline 6 yes)

What year car is it?

Thank you..for everyone..
it is simply posting a build thread..,,but if it is wrong I will delete it..

Car is 4 Matic 224 ps V6 cdi in 2007 Year..

Don't delete it, keep going!!

So ... there are some pictures of sandblasting and cleaning ..
https://cimg2.ibsrv.net/gimg/www.mbw...53618fd8a1.jpghttps://cimg5.ibsrv.net/gimg/www.mbw...980f92c66c.jpghttps://cimg9.ibsrv.net/gimg/www.mbw...b00c602e80.jpg

I have a lot of things to do...so it's getting ready slowly..:)
https://cimg7.ibsrv.net/gimg/www.mbw...9af62aea61.jpghttps://cimg0.ibsrv.net/gimg/www.mbw...b5e951a3e4.jpghttps://cimg8.ibsrv.net/gimg/www.mbw...7a5f0cfe1c.jpg

Looks good - I hope you get that sand blasting sand out fully.
I mean 100%

Thank you.. yes .. with great pressure several times ..after oiling..

And then come on ..a little tuning..
https://cimg0.ibsrv.net/gimg/www.mbw...f4ad457451.jpghttps://cimg0.ibsrv.net/gimg/www.mbw...ef870458ee.jpg
right:original
left : modified non original piston .. to lower compression, and + 1mm bore ...to high turbo boost..

Too small pictures to see any difference, but lowering the compression is detuning.

He lowered the compression so he can run a lot more boost through it. Machining the lip from the bowl is standard practice with diesel guys who are looking for power gains.

You are not talking about blowing hot air, are you? :D

No turbo engine is here detuning.. but this is a turbo engine...the compression should be reduced.. if you have more turbo pressure..
also apparent from the data provided by the factory...the higher the output..the smaller the compression..because of the surge..
as well as 84 gti

Nice build, keep the pics coming!!! Wouldn't hurt to include where you're from in your sig

Thank you very much., unfortunately I have little time ... but I will replace it..

https://cimg4.ibsrv.net/gimg/www.mbw...beee68377d.jpghttps://cimg6.ibsrv.net/gimg/www.mbw...7368bcd4a4.jpghttps://cimg0.ibsrv.net/gimg/www.mbw...5830aba470.jpg

New factory bearings,under part slowly ready,while going for the cylinder head porting!pictures coming soon:naughty::naughty:

Hi .. so .. a little rest .. while I did not rest "cylinder head porting an polish ..
The engine it was a little bit further forward, but I'll take some pictures later...
https://cimg0.ibsrv.net/gimg/www.mbw...b3f1236d13.jpghttps://cimg6.ibsrv.net/gimg/www.mbw...db146bc46b.jpghttps://cimg7.ibsrv.net/gimg/www.mbw...5e6f2beddc.jpg

W211 is a sedan. S211 is station wagon. There is no w211 wagon, or any chassis, that's simply an s211.