2015 GLA 200 CDI engine light, limp home
Thread Starter
Member
Joined: Oct 2014
Posts: 222
Likes: 2
From: Melbourne Australia
MY06 E55
2015 GLA 200 CDI engine light, limp home
i have a GLA200 CDI, was running fine no problems.
one day the gas gauge drops to 1/4 tank and the engine light comes on.
look at the code, P0101FC , P1614 P019300 is shown.
when the light is on , it is in a limp home mode, and sluggish as.
fill up with clean diesel, erase the code and all is good with the world.
30 miles later of normal driving, it happens again.
drain the fuel, Was clean, replace the filter, reset the code , and good. 30 or so miles later, light on again.
Car was 100% untill then, never had wrong diesel put in. no water, car has done 80,000 miles.
Don't even know where to start looking.
Any suggestions please
one day the gas gauge drops to 1/4 tank and the engine light comes on.
look at the code, P0101FC , P1614 P019300 is shown.
when the light is on , it is in a limp home mode, and sluggish as.
fill up with clean diesel, erase the code and all is good with the world.
30 miles later of normal driving, it happens again.
drain the fuel, Was clean, replace the filter, reset the code , and good. 30 or so miles later, light on again.
Car was 100% untill then, never had wrong diesel put in. no water, car has done 80,000 miles.
Don't even know where to start looking.
Any suggestions please
MBWorld Fanatic!
Joined: Jan 2009
Posts: 9,225
Likes: 1,798
From: V E G A S
1922 Ford Model T / no OBD
