Oil Level Sensor 2008 GL320
03-17-2024, 08:03 PM
#1
Out Of Control!!
Thread Starter
Oil Level Sensor 2008 GL320
Anyone ever change the oil level sensor?
I am getting "check.oil level next fuel stop"
But level is ok when checked. Near top but not over safe range.
I am getting "check.oil level next fuel stop"
But level is ok when checked. Near top but not over safe range.
03-18-2024, 02:04 PM
#2
Out Of Control!!
Thread Starter
Grrrrrr!!!!!!!!!!!!!!
Seems with a wealth of simple through the pan oil level sensors, MB with the M642 decided to use a sensor that bolts INSIDE the oil pan.
I guess I am going to just leave it in and put up with occasional errors on the screen.
Does anyone think an engine flush might help loosen up the float?
Anyone have a recommended flush for our oil-picky DPF systems?
Seems with a wealth of simple through the pan oil level sensors, MB with the M642 decided to use a sensor that bolts INSIDE the oil pan.
I guess I am going to just leave it in and put up with occasional errors on the screen.
Does anyone think an engine flush might help loosen up the float?
Anyone have a recommended flush for our oil-picky DPF systems?
03-20-2024, 12:03 PM
#3
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,094
Received 1,736 Likes
on
1,384 Posts
1922 Ford Model T / no OBD
This is how those sensors are calibrated on my engines.
Even I am old school and I like to refill new oil just above Min mark, I have to go closer to Max to avoid warnings.
Even I am old school and I like to refill new oil just above Min mark, I have to go closer to Max to avoid warnings.
