HBC350

I am trying to buy a part here in the United States that comes standard on European E Coupes. Specifically, the center armrests and console. They are a direct replacement fit for the rubber ones in my North American C63 and they are leather. My problem is that I need a VIN from any left hand drive 2010 E Class Coupe to provide to my local parts department so they can attempt to order it. Can anyone here help me out?

christiaan

go to EBAY, look up the car you want, and the VIN will be posted there for anyone to see..

HBC350

Tried that. But I need the VIN from a car that's in Europe and not North America. Almost all of the cars on ebay are here. I've tried perusing the German ebay but didn't find much and my German is ZERO! I've even tried going to individual dealer sites in Germany, Belgium, Netherlands, Czech Repub and looking at their CPO cars but they don't list VIN numbers like we do here.

multiformula

Hello I have a 350 cdi 2010 coupe and bought in Italy and I live in Italy (Sardinia) aiutart if I can explain to me what you mean by listing the VIN number 8 as we are here.) Ciao

HBC350

The VIN (as we call it here in the US) is the 17 digit number assigned to each individual car. It is on your dashboard just below the windscreen in front of the driver, and also located on a sticker inside the driver's door jamb.

Also, in Italy, is the steering wheel on the left or the right?

multiformula

VIN Posted at MP, I hope my Essert was helpful and a Mercedes E-Class 350 cdi coupe with quid left. HELLO

MARK CUMMINS

Contact MBENZNL.com re any EURO item you want Steve can help you re ANYTHING AMG or Mercedes and ship Fed Ex International 3 day

HBC350

I believe I worked with you at Newport Auto Center for a while. During Joe Taylor's management, right?

MARK CUMMINS

Flash Back to 1985?

HBC350

Was it that long ago? Who was the manager back then? Vern? Bill Blackwell? Joe Taylor? Tony Diullo?

MARK CUMMINS

Bernard Kraus then Joe Taylor and Jack Mcafee 85/86

HBC350

I was hired by Jack McAfee and worked for Joe Taylor. I was gone to Mitsubishi for two years while Bernard ran the place. Good timing, I hear. I also worked for Blackwell, Diullo and two or three other goofballs. Still keep in touch with the gang down there.