Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
In addition to vinyl wrapping, I have started offering plasti dipping services.
I did quite a bit of work on this Black Mercedes Benz E350 blutech. I blacked out the chrome/brushed aluminum window trim, lower chrome door pieces, and rear trunk chrome bar with my gloss black vinyl material, lightly smoked/tinted the tail lights, plasti dipped the wheels, rear badges, and front grill. Unfortunately, I forgot to take a picture of the front grill after I was done. The owner of this car came from San Diego up to me in Anaheim Hills/Orange County to have the vinyl work and plastidip work done on his car.
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
I did quite a bit of work on this Black Mercedes Benz E350 blutech. I blacked out the chrome/brushed aluminum window trim, lower chrome door pieces, and rear trunk chrome bar with my gloss black vinyl material, lightly smoked/tinted the tail lights, plasti dipped the wheels, rear badges, and front grill. Unfortunately, I forgot to take a picture of the front grill after I was done. The owner of this car came from San Diego up to me in Anaheim Hills/Orange County to have the vinyl work and plastidip work done on his car.
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this Silver Mercedes Benz C300 sedan I vinyl wrapped the roof with my gloss black vinyl material. Most cars that I have come by are either black or white, but I think the gloss black roof looks good on other colored cars as well, such as this silver C300. The gloss black roof gives the car a new/different look, without making it seem like an aftermarket piece. If someone looked at it without knowing, you wouldn’t think twice about it. It gives the car a sportier look as well. The owner of this car came out to me in Anaheim Hills/Orange county to have the vinyl work done.
In addition to wrapping the roof, I also blacked out the rear emblems on this car with plastidip as well.
Before:
After:
-Don Nguyen
donathon@gmail.com
In addition to wrapping the roof, I also blacked out the rear emblems on this car with plastidip as well.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is one of the cars that I worked on during my norcal/bay area trip. The owner of this white Mercedes CLA250 sedan had me vinyl wrap his front lower splitter/lip and the slats or fins on the side skirt rocker panels in the 3M 1080 gloss carbon fiber finish. Minor accents, but I think it changes the look of the car completely and gives it a sporty look to it. Almost makes it look like the car got an upgraded sport package.
I make occasional trips out to the bay area/norcal pretty often, so if you are up north and interested in getting vinyl work done by me the next time I am up there, send me a PM/e-mail and I’ll add you to my norcal contact list.
Before:
After:
-Don Nguyen
donathon@gmail.com
I make occasional trips out to the bay area/norcal pretty often, so if you are up north and interested in getting vinyl work done by me the next time I am up there, send me a PM/e-mail and I’ll add you to my norcal contact list.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this white 2014 Maserati Ghibli sedan, I vinyl wrapped the roof of the car in my gloss black vinyl material to give it the panoramic roof look. The owner of this car drove out to me in Anaheim Hills/Orange County, from Los Angeles to have the vinyl work done. Even though the car was brand new, the gloss black roof still changed the look of the car completely to the owner of the car. The owner had me leave the side rails body colored and only wrapped the center of the roof. This will give an idea to those who want to see what it looks like to have just the center of the roof wrapped only and keep the side rails body colored.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
On this new white Mercedes Benz E350 sedan, the owner had me lightly smoke/tint the head lights and tail lights of his car with my vinyl film material. I have had a lot of people ask me if they are tinted inside, but the film and method that I use is for the outside of the head and tail lights. In addition to changing the look of the car, the film also protects the head lights from rock chips, pitting, fading, etc. The owner of this car came out to me in Anaheim Hills/Orange County to have the tinting work done.
Driver/right side tinted/smoked - Passenger/left side stock:
After:
-Don Nguyen
donathon@gmail.com
Driver/right side tinted/smoked - Passenger/left side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this silver Mercedes Benz C300 sedan, I blacked out the silver and chrome areas of the grill in a matte black finish with plasti dip. In addition to the grill, I applied a light tint/smoke film to the chrome part of the blinkers on side mirrors. I think the black grill drastically changed the look of the car and gave it a more aggressive look. The good part about plasti dip is it is reversible and is removable just like vinyl. The owner of this car came out from Inland Empire area to me in Anaheim Hills/Orange County to get the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Did something slightly different on these tails than most of the pictures you guys usually see of me tinting/smoking the tails. For this silver Mercedes Benz C32 AMG sedan, I applied a transparent red film over the white portions of the rear tail light blinker areas, so that the white/clear portions matched the rest of the red on the tail lights. It’s a subtle change that changes the way the car looks and is still reversible for if the owner decided to go back to factory later on when selling the car or if they just want to change the look up again. I did this car during one of my norcal/bay area trips.
Right/driver side red clear film applied - Left/passenger side stock
Before:
After:
-Don Nguyen
donathon@gmail.com
Right/driver side red clear film applied - Left/passenger side stock
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this white Ferrari FF coupe has had several of his previous cars worked on by me in the past for different vinyl wrap projects. *For his Ferrari FF, we went with the my gloss black vinyl materials for the roof of his car to give it a panoramic roof look and also give it a more aggressive look. *Even though the car already stands out from other cars, the gloss black roof really changed the look of the car even more in a positive way. *The owner of this car was local to me in Yorba Linda and came out to my shop in Orange County to have the vinyl work done. *Also, the purple hue in the pictures was because this car was finished just as the sun was going down and the lighting of the sky was a bit purpleish that day, which translated over into the pictures.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This brand new matte grey Mercedes Benz GLA45 AMG came by to have me lightly smoke/tint the tail lights of his car. In addition to doing the tail lights, I also blacked out the chrome trunk and bumper bars, to complete the blacked out gloss black look on the rest of the car. The film is a very light shade, meant to give it a very factory or as I would like to call an OEM+ look. It’s subtle enough that if you didn’t know there was a film on there, you would have thought it came like this from the factory. The owner of this car was from Los Angeles and drove out to me in Orange County/Anaheim Hills to get the tint work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I was planning on mid to late March, but it depends on how busy my schedule is down here. If you can e-mail me at donathon@gmail.com, I can add you to my norcal contact list to let you know if/when I have confirmed dates.
Thanks.
-Don
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is something slightly different from the typical chrome that I wrap on most cars. The owner of this black Mercedes Benz CLA45 AMG had me vinyl wrap the chrome pieces on the top of his door handles with the 3M 1080 gloss carbon fiber material. The owner of this car was from South Orange County and came out to me in Anaheim Hills to get the vinyl work done. I think this finish and look went well with the darker/black color of the car, since it got rid of the chrome on the door handles, but at the same time giving it a slightly different look than just color matching the pieces to the rest of the car.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
These pictures are slightly over exposed, but I wanted the details of the parts that were actually being wrapped to show up in the pictures better. The owner of this white Mercedes Benz C300 W205 sedan had me vinyl wrap the lower front bumper chrome lip and also the body colored rear diffuser on his car with my gloss black vinyl material. Blacking out these pieces really cleaned up the look of the car and gave it a sportier look, since the immediate pieces around it were already black as well. The owner of this car came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this black Mercedes Benz E55 AMG Sedan, I lightly tinted/smoked the tail lights of the car with a vinyl film. The darker tail lights matched the darker theme of the car fairly well, with the car already having blacked out wheels, exhaust tips, etc. The film is a fairly light shade, so light output is minimally affected, unlike tail lights that are completely blacked out. The owner of this car was from around Huntington Beach I believe, and came out to me in Anaheim Hills/Orange County to have the vinyl wrap work done on his tail lights.
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
don@wannaberacer.com
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I forgot to take pictures for the before for this white Mercedes Benz CLA 250 sedan, before wrapping the roof of the car in my gloss black vinyl material. We went with the gloss black finish car wrap for his roof to give it the panoramic roof look. The owner of this car was from Brea and drove out to me in Anaheim Hills/Orange County to have the car wrap done for his roof. Since there was no sunroof on the car, the roof wrap provided a continuous clean look from the back of the roof of the front of the roof.
-Don Nguyen
don@wannaberacer.com
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a bit different, but I know you guys seeing more pictures of various and different type of wrap jobs than the regular roof, trim, etc wraps. I did a partial car wrap for the top half of this 2013 white Land Rover LR4 HSE. For this car wrap, we did the top half of the car in 3M 1080 gloss black vinyl material. I believe the owner of this car said that it’s suppose to resemble how the new Range Rover Autobiography editions come from the factory. I took two pictures of the during vinyl wrapping process, to show you guys how what it looks like during the transformation. The owner of this car was in Irvine and came out to me in Anaheim hills/Orange county to have the car wrap done for his car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a bit different, but I know you guys seeing more pictures of various and different type of wrap jobs than the regular roof, trim, etc wraps. I did a partial car wrap for the top half of this 2013 white Land Rover LR4 HSE. For this car wrap, we did the top half of the car in 3M 1080 gloss black vinyl material. I believe the owner of this car said that it’s suppose to resemble how the new Range Rover Autobiography editions come from the factory. I took two pictures of the during vinyl wrapping process, to show you guys how what it looks like during the transformation. The owner of this car was in Irvine and came out to me in Anaheim hills/Orange county to have the car wrap done for his car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this red Ferrari 458 I plasti dipped the front, rear, and top engine lid emblems/badges. I also blacked out the amber portion on his front bumper with my gloss black vinyl. For such a simple change, it really changed the look of the car quite a bit. Since there were no other chrome pieces on the car, after blacking out those chrome badges, it gave the car a sportier and more aggressive look, while cleaning up overall look of the car as well. The owner of this car was local to me and brought his car out to me in Anaheim Hills/Orange County to have the plastic dip and vinyl work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this silver Mercedes Benz C63 AMG sedan came out to me in Anaheim Hills/Orange County from Los Angeles to have me apply a gloss black vinyl roof car wrap for his car. People usually say white cars look the best with gloss black roofs, but I actually think it looks awesome on silver cars. The gloss black roof compliments the silver and other carbon fiber/black accents on the the car perfectly.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a returning customer who had me previous lightly tint the tail lights on his E92 M3. This time he had me come back to do the tail lights on his Audi V10 R8 as well. The film that I use is a fairly light shade, which is dark enough to give it a nice noticeable change and also still maintain a factory/OEM look. The owner of this car was in Irvine/Orange County near where I was so I dropped by his house to do the tail lights for his car.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
On this brand new white Mercedes Benz W205 C350 sedan I blacked out the factory chrome/brushed aluminum window trim surround with my gloss black vinyl material. Blacking out the chrome on the sides of the car with the gloss black vinyl car wrap really cleans up the lines on the side of the car, especially with the tinted windows that this car already had. I took quite a few before pictures at various angles to show how much of a chance it was from the before/after. The owner of this car was from Irvine and came out to me in Anaheim Hills/Orange County to have the car wrap done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this silver/grey Mercedes GTS AMG coupe came by to have me black out the chrome badges and emblems. I plasti dipped the rear emblems, front hood emblem and the star on the front grill. For the chrome horizontal slats on the front grill, I wrapped those in my gloss black vinyl, to match the gloss black grill that they were attached to already. The owner of this car was from Orange County and came out to me in Anaheim Hills to have the plasti dip and vinyl work done. I like the way the hood emblem turned out. The details in the emblem were not lost after being plasti dipped. The matte finish gives it a more interesting look.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
It’s been several months seen I have had a chance to post some pictures. Been extremely busy, so haven’t had a chance to post some of the work/cars that I have been doing. The owner of this white Lamborghini Hurrican brought his car by to black out the amber reflectors on the front and rear bumpers of the car. In addition to blacking those pieces out, I also plasti dipped the rear Lamborghini badge in matte black to basically get rid of the only chrome piece on the vehicle’s exterior. Overall, the work done was fairly simple, but these small changes still changed the look of the car up and gave everything a nice black and white color scheme. The owner of this car brought his car to me in Anaheim Hills/Orange County to have the vinyl and plasti dip work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Starting to see more AMG S editions come in to get vinyl work done. For the owner of this particular white Mercedes Benz C63S, he brought his car by to have me vinyl wrap what little brushed aluminum / chrome that was still left on the car around the window trim, lower side skirts, front and rear lower bumper trim pieces. We went with gloss black for wrapping all of the chrome, to give it an OEM gloss finish and also match the other gloss black accents that were already on the car. The owner of this car brought his car to me in Anaheim Hills/Orange County to have the vinyl car wrap work done.
Before:
After:
-Don Nguyen
don@wannaberacer.com
Before:
After:
-Don Nguyen
don@wannaberacer.com
