DIY: How to change center wheel caps!
Thread Starter
Member
Joined: Jun 2012
Posts: 127
Likes: 1
2010 E550
DIY: How to change center wheel caps!
I noticed that one of my wheel caps had fallen apart. So here is a simple DIY on how to change your center cap.
Tools needed: 1. Knife
2. Center cap (Part# A 171 400 01 25 5337) for 2010 E550. (your center cap may vary)
Take your knife and pull off the center cap.
As you can see in the picture, the new center cap needs to be pressed in.
Align the center cap to the rim.
Press in until it's completely inserted.
Done!
Tools needed: 1. Knife
2. Center cap (Part# A 171 400 01 25 5337) for 2010 E550. (your center cap may vary)
Take your knife and pull off the center cap.
As you can see in the picture, the new center cap needs to be pressed in.
Align the center cap to the rim.
Press in until it's completely inserted.
Done!
Last edited by lee16; Nov 25, 2015 at 01:51 AM.
MBWorld Fanatic!
Joined: Sep 2014
Posts: 1,018
Likes: 59
From: Virginia
2012 E550 Coupe, 2013 Escalade ESV, 2013 Lexus GS350, 2003 Honda VFR, 2017 Yamaha Kodiak 700 EPS SE
Thanks lee16. If available, I'd suggest using a plastic or rubber coated tool to lessen risk of scratching rim. There are cheap center cap removal tools (with rubber covered ends) available in most auto parts stores.
