speedo, rev gauge, gas gauge etc not working in the startup
Thread Starter
Newbie
Joined: Oct 2019
Posts: 1
Likes: 0
E350 Coupe
speedo, rev gauge, gas gauge etc not working in the startup
Hello everyone. I am new here. I purchased a c207 2012 e350 coupe with 64.000 miles. I had purchased new w212 2012 e250 cgi before in europe and bought this one when I come to the US. The car is rebuilt title had accidents before and i bought it very cheap to work on it and get everything done to save money. I paid 7k for it.
there are several problems about the car and I will try to solve it with help from y’all.
so the issue is when I start the car gas and rev counters are not working. After a minute they start working just fine. If I immediately move the speedometer is also not working but coming back to normal with others after a minute. Also, temp gauge is always in the middle no matter if the car is in idle, turned off or turned on after 10 hour of cool down. temp gauge doesnt work I suppose.
what can be the issue and repair solutions? Any ideas?
there are several problems about the car and I will try to solve it with help from y’all.
so the issue is when I start the car gas and rev counters are not working. After a minute they start working just fine. If I immediately move the speedometer is also not working but coming back to normal with others after a minute. Also, temp gauge is always in the middle no matter if the car is in idle, turned off or turned on after 10 hour of cool down. temp gauge doesnt work I suppose.
what can be the issue and repair solutions? Any ideas?
