Advice for '14 E350 Cabrio Purchase
Thread Starter
Member
Joined: Sep 2018
Posts: 175
Likes: 74
From: Tremonton, Utah
2014 E350 Sport 4Matic Sedan
Advice for '14 E350 Cabrio Purchase
With the recent total loss of my SL550, I'm looking for a new car and have found a beautiful '14 E350 Cabrio. Are there any items in particular that I should inspect before buying? Anything I should be concerned about? Any advice would be appreicated.
MBWorld Fanatic!
Joined: Aug 2005
Posts: 1,306
Likes: 204
From: Sarasota, Florida
2023 E450 Cabriolet, 2019 F150 Platinum, 2014 Dodge Challenger R/T
I have only had our 3 years and it has less than 20k miles....so kinda no new but so far no issues....
how many miles ?
report the vin and somebody may be able to run it for you..
how many miles ?
report the vin and somebody may be able to run it for you..
Thread Starter
Member
Joined: Sep 2018
Posts: 175
Likes: 74
From: Tremonton, Utah
2014 E350 Sport 4Matic Sedan
It has about 42k miles on it. I've ran the VIN, and already know that it has a branded title from flood damage. But the store I'm considering buying it from specializes in branded title cars and has an excellent reputation. And the savings are significant.
My question is more in regards to what those who have owned these cars before may be aware of to look for when inspecting an E350.
I have now driven the car. It drives beautifully. The only issues I could find is a crack in the finish of the ash tray door, and the metal plating on the seat release levers has peeled off, on both sides. I looked up the levers, and they are under $40 each. Can anyone tell me what is involved on replacing them?
My question is more in regards to what those who have owned these cars before may be aware of to look for when inspecting an E350.
I have now driven the car. It drives beautifully. The only issues I could find is a crack in the finish of the ash tray door, and the metal plating on the seat release levers has peeled off, on both sides. I looked up the levers, and they are under $40 each. Can anyone tell me what is involved on replacing them?
