Cascd

Hi guys, I have recently bought the wood trim for the front seat control. However, I don’t have any idea on how to take the seat control module out to replace the wood trim. I have found a video about this for a c class but they don’t look exactly the same at the back, so I still couldn’t take it out.
Do you guys have any experience or suggestion on how to get the control module out? Please also see my attached photos. Many thanks in advance!!

konigstiger

See lines 10 & 11 in attachments. Unclip switch cover from reverse side of door panel via A once unfastened, unclip switch block from cover.

Jmhm007

I tried everything to remove the module. I pressed on the letter A to remove the trim but nothing is working. Please tell me how to remove it.

Thanks

Late

I couldn't figure out how to get it out either.
The trim panel on the door is easy because it has those silver clips that just pop off. My wood trim was already cracked so I just pried it off with a flathead and epoxied the new one in place.

konigstiger

Jmhm007

Thank you so much for the help from both of you. I have the silver trim-. When pressing on the A, one part of the panel bent slightly to the outside. From the front, I was able to pry the panel off. It was just really tight. If anyone needs help please contact me.

Thnaks