Brake question for 2012 A207 cabriolet
#1
Senior Member
Thread Starter
Join Date: Jan 2018
Location: Atlanta GA
Posts: 471
Received 151 Likes
on
120 Posts
2012 E350 Cabriolet now SOLD to my son
Brake question for 2012 A207 cabriolet
Car has the AMG Sport Brake/ sport suspension/staggered wheel setup from factory. Does anyone know if the AMG drilled rotors are 322 mm or 344 mm. I m planning on replacing the Original OE items as they have 65K on them. I want to make sure I get the right items from FCP- Euro or Power Stop. Also has anyone used the Akebono carbon pads for the Sport brake setup ?
Appreciate any info on this
Appreciate any info on this
#5
Senior Member
Thread Starter
Join Date: Jan 2018
Location: Atlanta GA
Posts: 471
Received 151 Likes
on
120 Posts
2012 E350 Cabriolet now SOLD to my son
this is why it is confusing, two different answers. I will settle this by taking off the front wheels and measuring the rotor diameter. Ill post up what i find once i do
thanks guys !
thanks guys !
#6
Senior Member
I put my registration into a supplier site, just done it for 350 and that model does have 344mm which is due to the engine size rather than trim.
This is for UK models.
Put your reg into a supplier site to be sure.
AMG Sport part is just a cosmetic option with different wheels, bumpers, side skirts and floor mats. Engine etc is all the same as the equivalent SE model.
This is for UK models.
Put your reg into a supplier site to be sure.
AMG Sport part is just a cosmetic option with different wheels, bumpers, side skirts and floor mats. Engine etc is all the same as the equivalent SE model.
Last edited by 400ixl; 07-23-2020 at 03:45 PM.