“Check Right Low Beam” persists after replacing HID
#1
Newbie
Thread Starter
Join Date: Jun 2022
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2010 E350 Coupe
“Check Right Low Beam” persists after replacing HID
‘10 E350 Coupe
I’ve had this issue for a while now, finally got around to replacing the bulb with an OSRAM Xenarc 66140 bulb, which should be the ones already on the car. However the issue persists, no high and low beam on the passenger side, and the adaptive high beam assist remains inoperative.
Is this likely some sort of control unit issue? Really don’t want to bleed my wallet at the dealership getting them to fix the issue.
I’ve had this issue for a while now, finally got around to replacing the bulb with an OSRAM Xenarc 66140 bulb, which should be the ones already on the car. However the issue persists, no high and low beam on the passenger side, and the adaptive high beam assist remains inoperative.
Is this likely some sort of control unit issue? Really don’t want to bleed my wallet at the dealership getting them to fix the issue.
#2
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,431 Likes
on
3,150 Posts
'71 Pinto
Find an independent with Xentry (MB diagnostics) to pull codes.