Two issues on my car
Thread Starter
Newbie
Joined: Jan 2026
Posts: 2
Likes: 0
W213 E350d Convertible
Two issues on my car
I have a 2017 convertible and I have two issues.
Issue one
The passenger memory seat function isn't working. The seat works as it should and even when pressing M and then a number I get a beep but when pressing any of the numbers the seat does not move.
Issue two
The boot divider has stopped working. The button is illuminated but the divider doesn't move when I press the button.
I have spent quite a bit of time searching without finding a solution. Any help will be greatly appreciated.
Issue one
The passenger memory seat function isn't working. The seat works as it should and even when pressing M and then a number I get a beep but when pressing any of the numbers the seat does not move.
Issue two
The boot divider has stopped working. The button is illuminated but the divider doesn't move when I press the button.
I have spent quite a bit of time searching without finding a solution. Any help will be greatly appreciated.
Thread Starter
Newbie
Joined: Jan 2026
Posts: 2
Likes: 0
W213 E350d Convertible
Member
Joined: Sep 2019
Posts: 152
Likes: 48
From: Nashville, TN
'18 E400 Cab
Super Member
Joined: Jun 2017
Posts: 577
Likes: 195
From: PA
W223 S500 LWB 4-Matic, W222 S450 LWB 4-Matic, A238 E400 Cabriolet 4-Matic
Same here. Button lights up but no divider motor functionality.
I just took apart & cleaned the push button on the trunk lid for the divider. Really small critically oriented parts in that thing. It tests to be working as a switch now, but still no divider activation.
Need to find the fuse for the divider motor(s) & check them as the wires seem to be properly connected to the divider itself on the left. Will check for codes with iCarsoft MB v4.0 when I get a chance.
I just took apart & cleaned the push button on the trunk lid for the divider. Really small critically oriented parts in that thing. It tests to be working as a switch now, but still no divider activation.
Need to find the fuse for the divider motor(s) & check them as the wires seem to be properly connected to the divider itself on the left. Will check for codes with iCarsoft MB v4.0 when I get a chance.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
