Need to replace the timing chain and timing Marks MB 230E W123 series
Thread Starter
Newbie
Joined: Aug 2017
Posts: 5
Likes: 1
From: East London Eastern Cape South Africa
Model1984 230e
Need to replace the timing chain and timing Marks MB 230E W123 series
HI
My Mercedes Benz 230e petrol European model Timing chain came loose. I am going to replace the chain but i need the correct timing marks.
Any help will be appreciated
My Mercedes Benz 230e petrol European model Timing chain came loose. I am going to replace the chain but i need the correct timing marks.
Any help will be appreciated
MBWorld Fanatic!
Joined: Feb 2012
Posts: 2,611
Likes: 1,209
From: Phoenix
222 S-65
Newbie
Joined: Dec 2018
Posts: 3
Likes: 0
From: Yangon
W204
Not so happy.
Hi all.
i bought a kit from ebay hjl auto parts something. I have changed the kit and to be honest i m still not so happy.
The workshop guy said its because its not orginal mercedes parts. The mercedes parts he quoted me was 900 usd per cam.
I think the noice is still there.
i had chanined 2 cam sheft. 1 crunk pully. 2 chain. tensioner. 2 chain guide. 1 chaun balencer n 1 chain guide upper.
😟
i bought a kit from ebay hjl auto parts something. I have changed the kit and to be honest i m still not so happy.
The workshop guy said its because its not orginal mercedes parts. The mercedes parts he quoted me was 900 usd per cam.
I think the noice is still there.
i had chanined 2 cam sheft. 1 crunk pully. 2 chain. tensioner. 2 chain guide. 1 chaun balencer n 1 chain guide upper.
😟
Newbie
Joined: Dec 2013
Posts: 12
Likes: 1
2013 C300 4matic
I have the same issue with the noise on startup, I replaced with updated tensioner and check valve for the right side. The issue still the same, no improvement..... I turn the engine and found one of the Sprocket solenoid on the intake side is spiting out oil. At this point I don't know what I need to replace. I don't even know how to determine if the chain is no good or not. Or even the sprocket, Anyone can help me? or share some experience?
The whole thing started with engine misfire cylinder 1 (P0301) and now engine shakes at low speed and when you press the gas.
The whole thing started with engine misfire cylinder 1 (P0301) and now engine shakes at low speed and when you press the gas.
