300CE 1990 cam sensor plug wiring?
Thread Starter
Super Member
Joined: Nov 2002
Posts: 977
Likes: 0
From: San Jose
300TE / 300E / 300CE
300CE 1990 cam sensor plug wiring?
As pictured, the connector at the front right of the engine is frayed which I believe is causing my car not to start. Sometimes when I wiggle it, the engine will start. It's sheathed so it's not an easy solder fix. I can't find just the connector wiring so I probably need to replace the whole engine harness which will be costly. I can't find one for this year as most sources just sell the faulty later 93-95 harnesses. Any suggestions?
Last edited by pifcat2; Mar 9, 2008 at 05:27 PM. Reason: added model year
MBWorld Fanatic!
Joined: Dec 2006
Posts: 1,042
Likes: 1
From: Bellevue, NE
1995 E320 SE, 162,000 Miles (Sold) 2007 CLK350 Cabriolet 2014 ML550
As pictured, the connector at the front right of the engine is frayed which I believe is causing my car not to start. Sometimes when I wiggle it, the engine will start. It's sheathed so it's not an easy solder fix. I can't find just the connector wiring so I probably need to replace the whole engine harness which will be costly. I can't find one for this year as most sources just sell the faulty later 93-95 harnesses. Any suggestions?
Thread Starter
Super Member
Joined: Nov 2002
Posts: 977
Likes: 0
From: San Jose
300TE / 300E / 300CE
the insulation is pretty hard but it only broke in two places. I suspect the previous owner or mechanic broke it while working on the engine. The other sensor wire inside the front cap is ok but also has hardened insulation. The sad thing is the rest of the harness looks ok...
