FS: H&R springs & 18" Carlsson 1/6 wheels
05-20-2008, 04:26 PM
#1
Member
Thread Starter
FS: H&R springs & 18" Carlsson 1/6 wheels
The Carlsson wheels are 18x8, with an offset of 35.
The tires dont have much thread left in them. One of the wheel has a tiny hairline crack and leaks some air, which must be welded. I plan on getting them fixed, unless somebody buys them first. I've gotten some qoutes to fix that and they're around $60-100. So Im letting them go for $500. Also only the wheel with the hairline crack has a little bit of curbrash.
The springs are $230, and are only for 6-cylinder W124's
So I can fund my other project:
The tires dont have much thread left in them. One of the wheel has a tiny hairline crack and leaks some air, which must be welded. I plan on getting them fixed, unless somebody buys them first. I've gotten some qoutes to fix that and they're around $60-100. So Im letting them go for $500. Also only the wheel with the hairline crack has a little bit of curbrash.
The springs are $230, and are only for 6-cylinder W124's
So I can fund my other project:
Last edited by Mansoor 300; 05-21-2008 at 10:27 AM.
