Central Locking Conundrum, Yet another...
10-21-2010, 05:06 PM
#1
Newbie
Thread Starter
Join Date: Jul 2010
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
1988 300TE
Central Locking Conundrum, Yet another...
I'm going nutz trying to figure out my central locking problem. I have a working pump in place and fixed a crumbling connector plug.
I "looked" over the x30 block, but nothing in it was identifiable to me as belonging to the Locks by any diagrams I have.
My problem is that none of the 3 locks will fire the pump. I can pull + or - from the pump to the "pins" on the pump that should actuate from the doors and the pump "sucks and blows" the locks up and down.
Where are the points common to all the locks that would do this?
There is a point under the passenger seat I believe, I'm going to pull the seat out. Any troubleshooting help with this point or X-30 would be most appreciated.
Off to pull the seat...
I "looked" over the x30 block, but nothing in it was identifiable to me as belonging to the Locks by any diagrams I have.
My problem is that none of the 3 locks will fire the pump. I can pull + or - from the pump to the "pins" on the pump that should actuate from the doors and the pump "sucks and blows" the locks up and down.
Where are the points common to all the locks that would do this?
There is a point under the passenger seat I believe, I'm going to pull the seat out. Any troubleshooting help with this point or X-30 would be most appreciated.
Off to pull the seat...
