Cheap updated E320 3.2L Harness on eBay
#1
Super Member
Thread Starter
Join Date: Nov 2002
Location: San Jose
Posts: 977
Received 0 Likes
on
0 Posts
300TE / 300E / 300CE
#3
Super Member
Join Date: May 2003
Location: Motor City
Posts: 696
Likes: 0
Received 4 Likes
on
3 Posts
95 E320 Cabriolet, 108K
I know that number doesn't fit my model, a 95 cabriolet built later into the model year.
Otherwise, your listing is correct, that compatibility should be verified before bidding.
I believe verification can be done by looking at the tag that has the part number located about two feet from the bulkhead connector.
Otherwise, your listing is correct, that compatibility should be verified before bidding.
I believe verification can be done by looking at the tag that has the part number located about two feet from the bulkhead connector.
#4
MBWorld Fanatic!
Yes indeed there are two harnesses which I believe are known colloquially as the early "round connector" harness and the late "square connector" harness, with the later being only the later production '95 cars. I think I read somewhere that if you are willing to change a few of the sensors the earlier harness will work for the later cars as they are otherwise identical. From the engine schematic it looks like the earlier cars used separate temperature sensors (in different locations) for the gauge and engine control where as the later cars used a combination unit which contained all sensors in one place. Does anyone know if this is true?
- FD
- FD