how to change ball joints on a w124?
01-15-2011, 05:30 PM
#2
Super Member
Join Date: Nov 2002
Location: San Jose
Posts: 977
Received 0 Likes
on
0 Posts
300TE / 300E / 300CE
I replaced the complete LCA as you may as well replace the bushings too. If you just want to replace the BJ, borrow or buy BJ removal and press tools. If you can only buy them and don't see yourself using them again, buy the complete LCA instead. 3 bolts but you'll need a high range torque wrench. Also check your tie rods.
01-16-2011, 02:03 AM
#4
Member
Join Date: May 2010
Location: SoCal
Posts: 154
Likes: 0
Received 6 Likes
on
6 Posts
'91 C124 300CE,'06 ML 500 W164, '00 BMW MCOUPE, '65 COBRA REPL.
On some W124 (newer) the ball joints can not be replaced.
From my understanding, this is due to a change in the control arms because the brakes were upgraded.
If you have a 300CE, it is possible that they are not replaceable.
Make sure before you attempt to remove them.
From my understanding, this is due to a change in the control arms because the brakes were upgraded.
If you have a 300CE, it is possible that they are not replaceable.
Make sure before you attempt to remove them.
