H.I.D's
MBWorld Fanatic!
Joined: Jun 2006
Posts: 4,968
Likes: 3
1990 300ce 24v I6
http://www.theretrofitsource.com/index.php
The only place I would consider getting parts from, and the work would not be easy.
The only place I would consider getting parts from, and the work would not be easy.
Member
Joined: Jan 2012
Posts: 87
Likes: 0
2004 E500 (W211)
I am currently using DDMs H7 8000k slim ballast kit complete with error code eliminators. I've had mixed success. The good: The 'color' is consistent and our projectors offer a nice (not quite perfect) cutoff. Still, no problems with oncoming glare (no oncoming traffic flashing). The so-so: The passenger light still flickers on initial ignition (I've mounted the ballast away from the SBC and have replaced a ballast). Also, I have to turn the headlights on first then start the ignition in order to avoid the 'right low bulb malfunction' (passenger side) warning on the dash. My kit was not bi-xenon as HIDs were not an installed option.
Member
Joined: Jan 2012
Posts: 87
Likes: 0
2004 E500 (W211)
http://www.theretrofitsource.com/index.php
The only place I would consider getting parts from, and the work would not be easy.
The only place I would consider getting parts from, and the work would not be easy.
