Need help identifying these connectors!
Thread Starter
Newbie
Joined: Sep 2011
Posts: 4
Likes: 0
From: ATL
1994 E320 Wagon, 2000 CLK430
Need help identifying these connectors!
Ok, I'm doing the standard Replace-The-Crumbly-Wiring-Harness job on my 1994 e320 wagon. Since I acquired the new harness used online, (says Delphi Werk Bochum, MB 124 440 5632 on it) I figured best to lay it all out and make sure I can verify I know where everything goes before I start anything.
It all seems fine until I reach the very last 4 little barrel connectors (2 pairs). I figure one pair probably goes to the leads from the air pump, since those leads are wrapped around a hose on said pump instead of being connected to anything (the issue with the car is idle emissions and sometime erratic idle). But I have no idea WHICH pair would go to that or what the others would plug into; it appears the harness currently installed was cut. See attached pics. Any ideas? Please?
It all seems fine until I reach the very last 4 little barrel connectors (2 pairs). I figure one pair probably goes to the leads from the air pump, since those leads are wrapped around a hose on said pump instead of being connected to anything (the issue with the car is idle emissions and sometime erratic idle). But I have no idea WHICH pair would go to that or what the others would plug into; it appears the harness currently installed was cut. See attached pics. Any ideas? Please?
Thread Starter
Newbie
Joined: Sep 2011
Posts: 4
Likes: 0
From: ATL
1994 E320 Wagon, 2000 CLK430
Can somebody maybe take a good picture or three of that spot on the front of the engine where this thing terminates so I can see what those wires are plugged into? Need to get this car back into action real soon now so I can go to the beach Thursday night... (must leave at least one running car here, and alas this family has only 2 cars!)
Junior Member
Joined: Jun 2003
Posts: 64
Likes: 0
From: Northern Virginia
85 300SD, 80 280SL, 90 300TE 4Matic, 90 300D 2.5 Turbo, 91 300E 4Matic, 92 300D 2.5 Turbo, 87 300TD
Gently pull back the block covering and identify the colors of each wire and which they are paired with. Include the secondary colors if any. That will go a log way in figuring out that they are for.
