HID projector lights for sale
Thread Starter
MBWorld Fanatic!
Joined: Mar 2005
Posts: 2,647
Likes: 8
Youngtimer
HID projector lights for sale
I was unable to sell my car but would like to part out the lights.
They are smoked aftermarket facelift lights with real TSX projectors. I am selling with everything, including side markers, the HID kit (capsules and ballasts), and the 6-pin plugs... virtually plug and play. The lights also have a lamin-x plastic shield over them to save them from rock chips, fading, etc. I have almost $600 in total in parts in the lights. These are not bi-xenon so you will not have high beams, but the light output is exponentially better than stock as you can imagine.
I never got around to cleaning up the rear covers, they just have duct tape over the holes needed to mount the projectors. I had intended to do what 2Phast did on the back of his but just never got around to it. There is also some tape inside the housing that i used to cut down on some of the reflective glare, but as you can tell from the pics you can't really see it.
The projectors are almost invisible when the lights are off, and so i never put any bezels on them (i wanted to avoid the 'terminator' look that these cars get when you put projectors on them). You can always open them up and change that though.
I am looking for $450 including shipping, please PM me if you're interested, want more photos, etc.... thanks!
They are smoked aftermarket facelift lights with real TSX projectors. I am selling with everything, including side markers, the HID kit (capsules and ballasts), and the 6-pin plugs... virtually plug and play. The lights also have a lamin-x plastic shield over them to save them from rock chips, fading, etc. I have almost $600 in total in parts in the lights. These are not bi-xenon so you will not have high beams, but the light output is exponentially better than stock as you can imagine.
I never got around to cleaning up the rear covers, they just have duct tape over the holes needed to mount the projectors. I had intended to do what 2Phast did on the back of his but just never got around to it. There is also some tape inside the housing that i used to cut down on some of the reflective glare, but as you can tell from the pics you can't really see it.
The projectors are almost invisible when the lights are off, and so i never put any bezels on them (i wanted to avoid the 'terminator' look that these cars get when you put projectors on them). You can always open them up and change that though.
I am looking for $450 including shipping, please PM me if you're interested, want more photos, etc.... thanks!
Thread Starter
MBWorld Fanatic!
Joined: Mar 2005
Posts: 2,647
Likes: 8
Youngtimer
thanks man!
no, i'm hanging around for a while longer...! Needed a bit of cash flow which is why the car was for sale, but for now if i can part out the lights (and maybe the muffler too) i'll be happy.
no, i'm hanging around for a while longer...! Needed a bit of cash flow which is why the car was for sale, but for now if i can part out the lights (and maybe the muffler too) i'll be happy.
Newbie
Joined: Nov 2013
Posts: 2
Likes: 0
W124 E200 1995
Hi Zedstyle,
I have been looking to buy aftermarket lights with Projectors but the ones available on the internet are costing almost $500 (from Malaysia) and I am not too sure about their quality.
Do you still have the lights by any chance?
I have been looking to buy aftermarket lights with Projectors but the ones available on the internet are costing almost $500 (from Malaysia) and I am not too sure about their quality.
Do you still have the lights by any chance?
Thread Starter
MBWorld Fanatic!
Joined: Mar 2005
Posts: 2,647
Likes: 8
Youngtimer
Hey!
Yes I do.
but $500 for the projectors you are looking at now?
I can only assume you're not in the US, in which case it would cost an arm and a leg to ship these to you and that would likely offset anything you would save... where are you located? Also, feel free to PM me if you prefer.
Thanks!
Yes I do.
but $500 for the projectors you are looking at now?
I can only assume you're not in the US, in which case it would cost an arm and a leg to ship these to you and that would likely offset anything you would save... where are you located? Also, feel free to PM me if you prefer.
Thanks!
Newbie
Joined: Nov 2013
Posts: 2
Likes: 0
W124 E200 1995
Hi,
Yep, I am pretty far away, in Pakistan. Will PM you and let's explore the shipping costs.
Thanks.
Yep, I am pretty far away, in Pakistan. Will PM you and let's explore the shipping costs.
Thanks.
Hey!
Yes I do.
but $500 for the projectors you are looking at now?
I can only assume you're not in the US, in which case it would cost an arm and a leg to ship these to you and that would likely offset anything you would save... where are you located? Also, feel free to PM me if you prefer.
Thanks!
Yes I do.
but $500 for the projectors you are looking at now?
I can only assume you're not in the US, in which case it would cost an arm and a leg to ship these to you and that would likely offset anything you would save... where are you located? Also, feel free to PM me if you prefer.
Thanks!
