rims & lowering on 94 wagon
06-11-2013, 04:30 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: SoCal
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
w210 E55, w124 wagon
rims & lowering on 94 wagon
1994 e320 wagon
After upgrading stock rims with 225/45/17s all around, i am about to order parts to slightly lower my famwag. After using the resources of this, and other forums, i have collected the following part numbers needed to achieve a slight drop to improve aesthetics and handling:
front sportline springs
124-321-30-04
rear sportline springs
124-324-28-04
front bump pad (1dot)
201-321-09-84
rear bump pad (1dot)
201-325-09-44
Just to confirm, are these the correct p/n's and would i need anything else?
After upgrading stock rims with 225/45/17s all around, i am about to order parts to slightly lower my famwag. After using the resources of this, and other forums, i have collected the following part numbers needed to achieve a slight drop to improve aesthetics and handling:
front sportline springs
124-321-30-04
rear sportline springs
124-324-28-04
front bump pad (1dot)
201-321-09-84
rear bump pad (1dot)
201-325-09-44
Just to confirm, are these the correct p/n's and would i need anything else?
07-06-2013, 03:55 PM
#4
MBWorld Fanatic!
Good choice, those Sportline springs. I remain happy with mine, years after installation.
I am still daily driving the wagon, if not the Cabriolet. Both are at Sportline height.
Both were lower than Sportline height but I was not happy with the loss of travel. Read: rough roads.
I am still daily driving the wagon, if not the Cabriolet. Both are at Sportline height.
Both were lower than Sportline height but I was not happy with the loss of travel. Read: rough roads.
