18" AMG Monoblock II tire size?
#1
Almost a Member!
Thread Starter
Join Date: Dec 2004
Location: Redlands, CA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
18" AMG Monoblock II tire size?
Trying to decide a tire size for a 1995 E320 (with no drop) on 18" AMG's. Dont want to get too low prof and have too big of a gap in the wheel well. Thanks
#3
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
I don't really recommend 18's on your car. I would recommend 17 x 8 size wheels all around for a better fit. Especially if you plan on lowering your car
#5
MBWorld Fanatic!
Join Date: Dec 2002
Location: Vancouver, BC
Posts: 3,491
Likes: 0
Received 2 Likes
on
2 Posts
Enzo, my Benzo
BAH! ChrisdPham!
I run 18x8 ET35 Carlsson 2/6's and tried running 225/40/18 but because my car is very low it rubbd. 215/40/18 works like a charm and isn't even that rough...
Since you do not plan to lower it 225's will work great. I would recommend lowering it a bit because you'll end up with brutal wheel gap in the fenders kinda like mike's pic, (no offense mike
)
Here's my lowered 300E on 18X8's (215 40)
![](http://homepage.mac.com/zorroamg1/.Pictures/Enzo/spectrum.jpg)
and a pic of the lack of clearance of the 225's on the same suspension (just had em on for the show cause they wouldn't fit normally
)
I run 18x8 ET35 Carlsson 2/6's and tried running 225/40/18 but because my car is very low it rubbd. 215/40/18 works like a charm and isn't even that rough...
Since you do not plan to lower it 225's will work great. I would recommend lowering it a bit because you'll end up with brutal wheel gap in the fenders kinda like mike's pic, (no offense mike
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Here's my lowered 300E on 18X8's (215 40)
![](http://homepage.mac.com/zorroamg1/.Pictures/Enzo/spectrum.jpg)
and a pic of the lack of clearance of the 225's on the same suspension (just had em on for the show cause they wouldn't fit normally
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#6
Member
Join Date: Mar 2004
Location: Miami, FL
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
ex 300E driver
No offense taken Zorro. After all, I sold that car already, so its not mine anymore. What was the offset on the carlssons? I rad 18x8 et 38, I think that a 35 offset would be the culprit to the major rubbing issues, when lowered.
#7
MBWorld Fanatic!
Join Date: Dec 2002
Location: Vancouver, BC
Posts: 3,491
Likes: 0
Received 2 Likes
on
2 Posts
Enzo, my Benzo
As stated above, I run ET35 on the Carlssons. The 215's don't rub at all. 225's would require me to roll the fenders and I can't be bothered to re paint all four fenders when the likely event of paint cracking occurs
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)