kdude87

hey guys i have a slight problem i think..when i get into my benz, and turn on the wipers they work fine....but then when i try to use the fluid it doesnt come out???? the washer fluid tank is full so i dont know why its not coming out...any suggestions?

youseffex

Clear the holes where the water comes out by using a needle, They might be blocked, thats how I fixed mine.

kdude87

are u talking about the holes on the windshield?? or the holes that are in the tank?

kdude87

i just did what you told me to do but it still wont come out....this sucks lol

Rumpelstiltz

Have you tried to follow the hoses from the washerfluid tank, to check whether they all fastned correctly?

Also, do you have the extra tank for the light washer?

jamie645

I don't know where you're located, but if it's below freezing and you don't have a strong solution of anti-freeze then your lines are probably frozen

Jackwf

the possible cause:
1. injection holes is blockage
2. hoses is leaking/breakage
3. washer pump mulfunction ( wire open circuit / wahser pump damage)
* refer to diagram for washer pump location.

kdude87

hey thanks a lot man i did it again and the fluid came out...shukran! thanks to all whp tried to help!