***Post Pics Of Your W210 E-Class!!!***
 

Show us your W210!!!!!!

pics in sig but im sure most everyone has already seen my car :D

hee hee i'm sure you all have had enough of my car, after my "hosed by a lincoln navigator" thread :D

http://www.ovaisandedyta.com/images/merc.jpg

1998 E430 with AMG wheels and bodykit

This is the only one I have at work, It's a little grainy. I'll post a better one later.

Here's a couple (better ones later.......)

Where's your's Vik?

IMO the best angle....

Here's a bonus - my buddy's A-Class....is this allowed?:D

Still not finished but here you go...

Jimmy when's the baby due?

BTW, how wide are those 1/6's? If 9.5-10" what would be the required offset (I know, there's calculators around but they won't tell me much I could spare on the insides)? Did you have to roll the fenders? Sorry, too mnay questions:bow:

The bumper should be finished, hopefully by next week if my friend hurries up and finishes the mold he is making from it! :mad: Anyway, I drive a lot and didn't want to go with a staggered set up so I went 8.5 all the way around. That way I can rotate my tires. The common offset is usually 35. No problem on the questions, that's what we're all in here for, offer and receive help...;) :D

If its going to take any longer, you'll be close to having one less friend.

Surely 8.5"s in the back ain't going to hold the road very well during an agressive takeoff?

I was offered a set of used 8.5/18" Brabus Mono IV's with spacer for approx. US$500 (after trade-in) today but was reluctant to go with those cos I thought the 8.5" wouldn't look as good in the back - I guess I was wrong. But I also didn't want to go with anything that will take away the simple forms of the E-class (much prefer one that're similar to your Carlssons or the AMG style III 5-spokes)

Jimmy...Where can I buy the front bumper at? I LOVE the front bumper~!!~!~

8.5" tires in the back will hold just fine depending of the type of tires you use. I don't recommend Pirelli P7000's though, too slippery for my liking.

Jimmy, Don't those 8.5's up front rub?

http://www.michakaveli.com/benz/Hamm...ett/Ham_08.jpg

My 96 E320
 

http://www.mbnz.org/gallery/pics/506...00354744PM.jpg

More pictures in my link at the bottom.

Not really. They have only rubbed on me twice since I've had them and that was because I had the car packed with 5 of us in it and a bunch of stuff in the trunk and went into a driveway a little too fast. Other than that, not a problem.

Benz, I might have one avail. in the next week or so for about a little over a grand. This is the real thing and not the aftermarket or fake ones that are being produced, like my friend is trying to do. This is authentic Carlsson. PM me if you're interested and I will let you know once I have posession of it...

With an extra 4mm offset, that should just about bring the wheel back in to the standard issue AMG 8"/ET31 clearance - not sure how much you'll have on the inside. Having said that, my 8"AMGs rubbed once (and pushed out the fender:mad: !) when I swung full-lock a little too fast (and I'm already using 225's instead of the recommended 235's).

My $0.02 worth.

more

and the front

Mine.

http://www.mustangmods.com/data/587/benz1.jpg

and two V8s side by side :D

http://www.mustangmods.com/data/587/babies.jpg

Nice and neat garage :y ! I wish mine looked like that...

ditto that for me!!!!:bow:

.