Help with Headlamp Washer Cable wiring needed
12-20-2012, 02:49 AM
#1
Member
Thread Starter
Join Date: Apr 2007
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Help with Headlamp Washer Cable wiring needed
Does anyone have instructions for installing the wiring harness for the headlamp washer to the fuse box and dashboard switch? I have this diagram but I don't know exactly where everything goes. There is a big red cable attached to the wiring harness that I do not have any idea where it might go. It looks similiar to a positive battery cable. If you have any more diagrams and pictures, they will help also. Thank you in advance for your assistance.
12-20-2012, 01:39 PM
#2
Member
Thread Starter
Join Date: Apr 2007
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
I have attached pictures of the ends of the wires from the headlamp washer wiring harness. Does anyone know where these need to connect? If so, please let me know. Thank you in advance for your assistance.
12-21-2012, 11:04 AM
#3
Out Of Control!!
First this job ain't simple and requires more than a cable!
Do yourself a big Christmas favor and spend the 18 bucks at MB startek and search for documents----AN8215P001A or if as of 01_1999 see AN8215P001FF. Hopefully your VIN is as 01_1999.
Additionally, if you go back to EPC and click on the connector ends----a location banana will fall of the bunch!!
Do yourself a big Christmas favor and spend the 18 bucks at MB startek and search for documents----AN8215P001A or if as of 01_1999 see AN8215P001FF. Hopefully your VIN is as 01_1999.
Additionally, if you go back to EPC and click on the connector ends----a location banana will fall of the bunch!!
12-21-2012, 08:27 PM
#5
Out Of Control!!
I guess you are not famuliar with WIS. The document I referenced is the front doc, every step in the front install has a document referenced for each step. You need the complete set to do the job-------spend the 18 bucks for 24hr access---do you know how much stuff you can print in 24hrs.
