Built in from factory phone 1996E320
#1
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
1996 Marcedes E320
Built in from factory phone 1996E320
When I turn my key on the phone makes a sound like it is turning on. How do I prevent that from occuring? Also my rear electric antenna for the phone makes a noiselike it is extening and then maybe retracting. I remover the fuse from under the rear seat that says phone but the radio dial reads PHONE and will not work. How can I just stop the phone from trying to come on and the antenna to stop making noise?
Thanks,
Mark
Thanks,
Mark
#3
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
1996 Marcedes E320
#4
Out Of Control!!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
I believe the simplest way to disable the phone is to disconnect the CTEL transmitter_receiver which is located behind the drivers side trunk space. Remove the cover and all will be clear.
If you want to fix the problem----that can only be done with factory scan tool DAS(HHT) Xentry.
If you want to fix the problem----that can only be done with factory scan tool DAS(HHT) Xentry.
#7
Out Of Control!!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
To remove the ashtray---you first have to remove the center consol shifter cover----then remove the ashtray insert----then remove the three screws----then lift up and out----then disconnect conector---then go have a smoke and or a drink
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
If you don't want to putz with that------use a small band aid!!