Lower oil pan bolts torque
#1
Junior Member
Thread Starter
Join Date: Oct 2016
Location: Pacific NW
Posts: 18
Received 0 Likes
on
0 Posts
W202 C230, W210 E320 Estate, Volkswagen EuroVan MV, Volkswagen Jetta TDI
Lower oil pan bolts torque
W210 with M112. Could someone please tell me the torque spec for the lower oil pan bolts from the WIS (or other reliable sources)? Surprisingly, I cannot find definitive answer on the web...
Last edited by firebrick; 03-03-2019 at 06:35 PM.
#4
Junior Member
Thread Starter
Join Date: Oct 2016
Location: Pacific NW
Posts: 18
Received 0 Likes
on
0 Posts
W202 C230, W210 E320 Estate, Volkswagen EuroVan MV, Volkswagen Jetta TDI
Thank you for that @bbirdwell. I assume you are suggesting 10Nm should work for the M112 as well even though the diagram is not of the M112/M113, correct? I am really surprised how difficult it is to find the proper torque setting for this job, especially knowing the high fail rate of the oil level sensors...
#5
MBWorld Fanatic!
Join Date: Jan 2014
Location: Republic of Texas
Posts: 3,222
Received 930 Likes
on
722 Posts
'99 and '05 E55 AMG
Oil pan bolts are usually 6mm thread diameter. 10 Nm equates to 7 ft-lbs.
Reference chart here:
https://forum.classicmotorworks.com/...?topic=10638.0
Reference chart here:
https://forum.classicmotorworks.com/...?topic=10638.0