DIY Cradle Eliminator Cable
08-12-2021, 10:01 AM
#1
Newbie
Thread Starter
Join Date: Mar 2021
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2000 E320
DIY Cradle Eliminator Cable
Had an idea from an older post I read. Would it be possible to construct my own V60 cradle eliminator cable using the following?
V60 Data Cable
RJ50
I figure in the center console, there is the RJ50 connection. I could strip the USB cable and then rewire and crimp to the RJ50.
The only snafu would be finding out the color pinout to what it lines up to for the RJ50 connection into the car.
Any thoughts?
Otherwise, I was wondering if this would do the trick... Motorola Cable with cradle
V60 Data Cable
RJ50
I figure in the center console, there is the RJ50 connection. I could strip the USB cable and then rewire and crimp to the RJ50.
The only snafu would be finding out the color pinout to what it lines up to for the RJ50 connection into the car.
Any thoughts?
Otherwise, I was wondering if this would do the trick... Motorola Cable with cradle
