no crank with key fob
Thread Starter
Newbie
Joined: Nov 2021
Posts: 12
Likes: 3
1986 190e 2.3-16v cosworth
no crank with key fob
Hi All
I had my car running at idle for about 10 minutes then shut it off.
later came back and try to start the car and nothing happen.
all the cluster warning lights and gauges are working but the car just doesn't crank.
I checked the battery voltage and it's good at 12.50V
could it be my starter relay ? or my immobilizer/alarm is broken?
Please help cuz I can get to car to turn on.
Thanks,
I had my car running at idle for about 10 minutes then shut it off.
later came back and try to start the car and nothing happen.
all the cluster warning lights and gauges are working but the car just doesn't crank.
I checked the battery voltage and it's good at 12.50V
could it be my starter relay ? or my immobilizer/alarm is broken?
Please help cuz I can get to car to turn on.
Thanks,
Thread Starter
Newbie
Joined: Nov 2021
Posts: 12
Likes: 3
1986 190e 2.3-16v cosworth
FIXED.
I took the starter relay out and bench tested it.
Verify that it works fine.
Plug it back in and the engine starts right up.
It could be a loose connection.
I will get a new relay just in case this relay acts up again.
Thanks.
I took the starter relay out and bench tested it.
Verify that it works fine.
Plug it back in and the engine starts right up.
It could be a loose connection.
I will get a new relay just in case this relay acts up again.
Thanks.
