Passenger Seat Belt light???
Thread Starter
Member
Joined: May 2005
Posts: 82
Likes: 0
From: Sacramento, CA
2005 SL500, Black on Stone
Passenger Seat Belt light???
Passenger got out of the car tonight in my '05 E320 tonight. After she left, the seat belt light would not go out and the beeping started. WTF???
Anything I can do to set/reset something? Is there a sensor to reset or does it just have a problem I need to visit the dealer for?
The light does go out and the beeping stops when I put the seat belt in the harness on the passenger side.
Thanks,
Dan K.
Anything I can do to set/reset something? Is there a sensor to reset or does it just have a problem I need to visit the dealer for?
The light does go out and the beeping stops when I put the seat belt in the harness on the passenger side.
Thanks,
Dan K.
Member
Joined: Nov 2004
Posts: 171
Likes: 0
From: Los Angeles / Orange County
2005 E500 / 1993 MR2 Turbo
I had the same problem. The car still thinks that there is someone still in the passenger seat. Take it to the dealer and they'll do some adjustments to the sensor. Takes no more than a couple of hours.
Almost a Member!
Joined: May 2005
Posts: 46
Likes: 0
From: NJ
2005 E500 4matic, 2003 SL500
i had the same problem. called the dealer and they told me that its because of my briefcase on the seat. the sensor was set for 9 lbs. it can be changed to 13 lbs or so max but can't be disabled. i just turn the radio up to override the beeping.
Junior Member
Joined: May 2010
Posts: 20
Likes: 0
2006 Black E350 SportAmgPackage
I have the same freakin problem, that damn noise won't stop beeping and it makes like there is someone sitting there every single time I drive but there is no one there. Can anybody give some goo advice on how to fix this problem?????????
MBWorld Fanatic!
Joined: Nov 2001
Posts: 4,260
Likes: 6
From: Philadelphia area
2010 ML550, 2010 E350 4M, 1966 Corvette Convt C2
As I said earlier in this old thread the adjustment on the weight sensor on the Pass seat is out of adjustment or has a problem. Dealer can re callibrate or if that does not work change the sensor. Not a big deal. You cannot disable this feature but in the interim before you get to the dealers you can fasten the pass seat belt over the empty seat and that should silence it.
