E-Class (W211) 2003-2009

03 w211 command and navigation

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-07-2007, 08:37 AM
  #1  
Junior Member
Thread Starter
 
Vann's Avatar
 
Join Date: Jun 2006
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
03 w211 command and navigation

I have an 03 e320 and im looking to get the bigger screen, I may choose to get navigation a little later...I was looking on ebay and I came across a few headunits w/ the "big screen" (pardon my ignorance) My question is, Is the headunit with the "big screen" plug and play, and does it also have and aux output? And also what is needed for navigation
Old 03-07-2007, 10:32 AM
  #2  
Almost a Member!
 
hnieto1's Avatar
 
Join Date: Feb 2007
Location: Maryland
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
'99 C280, '03 E320, '04 C240 4MATIC
Head units are plug and play. The Euro COMAND head units do have an aux output as well as a DVD player. If you decide to buy a Euro COMAND, make sure the person that is selling it to you changes the DVD region settings and unlocks the 'play in motion' function. The secret engineering mode that can changed these settings has been changed in newer COMAND's. For the navigation, some '03s are prewired for navigation in the trunk. The wires are tied behind the fuse box. If you have the wires, all you need is the console, mounting bracket, trunk panel and DVD. This is a general overview of what you need to upgrade your car. Hope this helps.
Old 03-07-2007, 06:15 PM
  #3  
Junior Member
 
raheelq's Avatar
 
Join Date: Feb 2007
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by hnieto1
If you decide to buy a Euro COMAND, make sure the person that is selling it to you changes the DVD region settings and unlocks the 'play in motion' function. The secret engineering mode that can changed these settings has been changed in newer COMAND's.
What if the seller doesn't know how to change the region settings and unlock the "play in motion", what would you tell him ? or how can it be done ?
Old 03-07-2007, 09:30 PM
  #4  
Almost a Member!
 
hnieto1's Avatar
 
Join Date: Feb 2007
Location: Maryland
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
'99 C280, '03 E320, '04 C240 4MATIC
No one knows the 'engineering' menu access code for an '05 or later model euro COMAND. Mine is still set on Europe/Asia region DVD's and my DVD player is still not able to play in motion. There are many different codes that many people have tried and no luck. The Euro COMAND is still a better buy than US COMAND even if it doesn't play in motion (it's distracting anyway)...unless you subscribe to satellite radio.
Old 03-08-2007, 06:43 PM
  #5  
Junior Member
 
raheelq's Avatar
 
Join Date: Feb 2007
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
I did a search and found a .pdf that shows you how to do it for an 03-04 command unit (I think).
One more question, after installing the unit, won't you need a radio code to go with it ? I mean, isn't taking out your old unit and replacing it like disconnecting the battery?
Old 03-08-2007, 11:19 PM
  #6  
Almost a Member!
 
hnieto1's Avatar
 
Join Date: Feb 2007
Location: Maryland
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
'99 C280, '03 E320, '04 C240 4MATIC
When I installed mine, it was plug and play. Everything worked fine for me. It even had the right time and date when I first turned mine on.
Old 03-08-2007, 11:47 PM
  #7  
Member
 
smb7420's Avatar
 
Join Date: Jan 2007
Posts: 241
Likes: 0
Received 0 Likes on 0 Posts
E500
Originally Posted by raheelq
I did a search and found a .pdf that shows you how to do it for an 03-04 command unit (I think).
One more question, after installing the unit, won't you need a radio code to go with it ? I mean, isn't taking out your old unit and replacing it like disconnecting the battery?
the radio isn't inside the actual comand unit.
It's all plug and play, no worries
Old 03-09-2007, 12:16 PM
  #8  
Super Member
 
murman's Avatar
 
Join Date: Aug 2006
Location: Vancouver Canada
Posts: 724
Received 50 Likes on 39 Posts
S213 2020 E450 4Matic CDN Spec 07/19 build
Originally Posted by raheelq
I did a search and found a .pdf that shows you how to do it for an 03-04 command unit (I think).
One more question, after installing the unit, won't you need a radio code to go with it ? I mean, isn't taking out your old unit and replacing it like disconnecting the battery?
There are no security codes with COMAND or Audio 50 units, notwithstanding the nice "radio code" sticker MB placed on the door windows. Never understood why they don't have a code system, except to the extent that you need much more time than a standard smash-n-grab in order to remove the unit. (Did see a pic in a UK forum of a COMAND unit that looks like it was crowbarred out, though)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 03 w211 command and navigation



All times are GMT -4. The time now is 06:25 AM.