Juice1979

Hey guys, first let me say that this is a great site!!!...I just installed lowbeam HIDS on my buddys 08 E350 and they are aimed to high. Where is height adjustment screw on these headlights. Did a search and couldnt find anything...A pic would be great if possible. Thanks in advance!

LB Bnz

with the hood raised, look right above the main headlamp and you'll see a small opening showing a spot where you insert a 1/4 allen wrench (its a small hole closer to the main headlamp) and turn counter-clockwise to lower the beam...

Diesel Benz

But isn't there something wrong with the HIDs if you need to adjust the beam aiming when changing the bulb (not a big surprise from after market kits though)? Check how the high beams aim after you try to make the low beams OK. Test lights against the wall, keep one side original and the other one new and look at the light pattern, how much glare difference can you see?

starbrite

If you read the OP, I believe he installed complete assemblies (to replace Halogens) not just changed the bulb.

mongi