License Plate LED bulb install
Thread Starter
Junior Member
Joined: Nov 2006
Posts: 58
Likes: 0
From: New Jersey
2007 E350 Sport
License Plate LED bulb install
Hi all, so I want LED bulbs for my license plate lights to make the car look a bit more modern. Is it easy to install these? Do I simply remove the 2 screws from the outside and simply replace the bulb? Or do I have to go through inside of the trunk and remove the felt? Here is a link to the bulbs...please let me know if these are the right size. thanks!!!
http://store.ijdmtoy.com/OBC-6418-C6..._d36_sku30.htm
http://store.ijdmtoy.com/OBC-6418-C6..._d36_sku30.htm
Junior Member
Joined: Aug 2004
Posts: 24
Likes: 0
W203, W211, W212
Not sure about other years, but on my '07 like the one you have, you need to go through the trunk and trunk liner. It's not very hard - search, and there's a DIY for it. It helps if you have small arms, since you don't need to remove all of the liner.
The bulbs are 168/194 size, not the ones in that link. You can ebay them - just do a search of "CANBUS 168 194," and you'll pull them up. CANBUS is the circuitry, I think, so that you don't get the error.
The bulbs are 168/194 size, not the ones in that link. You can ebay them - just do a search of "CANBUS 168 194," and you'll pull them up. CANBUS is the circuitry, I think, so that you don't get the error.
Senior Member
Joined: Aug 2007
Posts: 440
Likes: 1
From: Exit 16E
07 E350 4Matic / Sport with P1
