03 E500 no start problem
Thread Starter
Member
Joined: Apr 2006
Posts: 113
Likes: 0
From: Louisiana
03 E500 Sport, 03 Eddie Bauer Explorer, 06 Pro Street Chopper
03 E500 no start problem
I searched and didn't find a similar problem and solution.
I changed the TPS sensor a few month's back and all was good. Now, when I turn the key to start I get nothing. The dash lights-up and everything else works as normal when the key is turned to the ignition position. When it's turned to start everything stay's lit but it doesn't engage the starter. At first I had to turn the key to the off postion and then back on to get it started. Now I'm having to cycle the key off and back to the start postion several times before it turns the motor over. Once it engages it fires right-up. No messages flashed me on the dash yet. Can anyone help point me in the right direction?
I changed the TPS sensor a few month's back and all was good. Now, when I turn the key to start I get nothing. The dash lights-up and everything else works as normal when the key is turned to the ignition position. When it's turned to start everything stay's lit but it doesn't engage the starter. At first I had to turn the key to the off postion and then back on to get it started. Now I'm having to cycle the key off and back to the start postion several times before it turns the motor over. Once it engages it fires right-up. No messages flashed me on the dash yet. Can anyone help point me in the right direction?
