Drooping front bumper cover
08-06-2011, 04:18 PM
#1
Member
Thread Starter
Join Date: Aug 2011
Location: NS
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
2017 GLC43 'AMG'
Drooping front bumper cover
2008 E350 4Matic w. Sport
We noticed that the front bumper cover seems to be a bit too low at the front. The gaps around the middle lights, from the engine lid to the bumper cover, are just a bit too wide (up 3 or 4 mm would fix it). The engine lid seems to be in the right place.
And the trailing edges of the bumper are pressing hard up against the fenders (zero gap, tight).
Is this something that can typically be adjusted out?
Thanks!
We noticed that the front bumper cover seems to be a bit too low at the front. The gaps around the middle lights, from the engine lid to the bumper cover, are just a bit too wide (up 3 or 4 mm would fix it). The engine lid seems to be in the right place.
And the trailing edges of the bumper are pressing hard up against the fenders (zero gap, tight).
Is this something that can typically be adjusted out?
Thanks!
