Chrome Exhaust Tips from PP Installed
 

See them here: http://f1.pg.photos.yahoo.com/ph/tip...ay+DMP&.src=ph


(Pictures of my Gateway DMP will show up first, then the Tips!)

Easy install.

Looking good! Do those tips have a hole under them?

nice. what is pp?

Performance Products

Nice slide show. How was the installation of the tips? Pretty straightforward? Thanks for the input.

Bruce

Looks real sharp --- By the look of that one close up shot, it appears that you cannot see the "bend" upwards from the stock tailpipe. What is your opinion on that taking a first hand close look --- can you tell they are "clip-ons" ?

Im currently bidding in a pair right now -- hopefully Ill win.

Thanks
- NRealm

i might be in the minority but it looks weird coming from the bottom of the bumper. it there were holes for the exhaust like the amg bumper it would look better.

03Baby! ---- are the exhaust tips you purchased from Performace Products the same as the ones located at formymercedes ?

http://www.formymercedes.com/mb_resu...e+Exhaust+Tips

I agree that the look is not perfect, but I personally want to do something that is not too expensive or extreme to enahance the sportiness of the car. I would have loved if at least the Appearance Package had come with an exposed exhaust.

I went to a mod place and asked about adding a new exhaust for the car, and it was going to be an expensive venture.

Not bad at all!

I wonder if there are any quads with rolled tips. That would be nice.

Something like.....

http://www.mh-dezent.de/frames/detai...2100-4_034.jpg

Thanks guys.


JM88E500: Yes there is hole that slides up to the exisitng tailpipe.

BMcD-E500: Install was quite easy. More time taken going back and forth ensuring that it was straight. came with 8 screws and allen wrench.

NRealm: There is no bend (or curve, if that is what you mean). You cannot tell unless you view it closely from the side. The one from formymercedes.com looks the same. email them as there is one made by a company called Schatz(?) and that does not fit or look as good. I know because I saw those side by side with what I have now. Mine by the way came in a box marked "GAP". And if you are interested in buying a set of these, make sure that you order part number 49-280MP.

I added a couple of more pictures for your reference:
http://f1.pg.photos.yahoo.com/ph/tip...ay+DMP&.src=ph


Did not want to cut the bumper or spend more just to achieve this look for right now. Although Oslo's Quad Pipes look awesome!

does that void any kind of warranty, since you puncture the stock exhaust?

Something like that. Not sure if those are rolled tips though. I know that catback system costs around US$1500.00 which isn't too bad of a price.

I like the ones on my car better

https://mbworld.org/forums/attachmen...&postid=496887

:bow: Nice ride Dr. Chill. Is that your speedometer reading 143mph?

It was an AMG Challenge E55 speedometer while we were circling the tri-oval at Daytona last May. The car pulls hard to 155 and I've hit the rev limiter several times. You non AMG W211 guys don't know what you're missing.

I am jealous. But I'll tell you one thing I am NOT missing. The extra $50 Grand. :D
Maybe next time. Its all about baby steps. very nice ride.

Are the cops pulling you over for those dark tint?? IT look good, but too dangerous!!!

03BABY! Can you post a lonk to the item you bought on Performance Products site, please.

Dr. Chill if you ever decided to take the tints off your back lights what would you take them off with? Thanks

The item number does not show online, you have to call them to order this part, make sure that you order part number 49-280MP.

Thanks for the part number info. I called them last week, ordered them, installed them, and here's what it looks like. I'm very satisfied with the results.

http://206.159.116.24/images/temp/exhaust1.jpg

Does anyone know if they will fit any W211? Including my E270CDi? Thanks.

VERY nice ! Im still waiting for mine to arrive ... cant wait.

Few questions :

How long did it take you to install ?
Did you have to drill any holes ?
Was it difficult to align them ?
Is it noticable that they are clamp on's ?