09 E350 Manifold Default Codes
05-10-2016, 11:03 AM
#1
Newbie
Thread Starter
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1995 c280
09 E350 Manifold Default Codes
Dealer just informed me that default codes showing a problem in the manifold. He said that I will have to replace the manifold once the check engine light begins to come on. This hasn't happened yet. Cost $2,500. Anyone have this problem?
05-10-2016, 11:36 AM
#2
Out Of Control!!
What problem-----you never indicated what fault code-----theres a whole SL of em!!
However if the fault surrounds the plastic throttle linkage--there is a metal alternative---simply google!!
However if the fault surrounds the plastic throttle linkage--there is a metal alternative---simply google!!
05-12-2016, 04:25 PM
#3
MBWorld Fanatic!
Yes, there is a alternative however if one or more of the capsules are effed then i think replacement is necessary. I would find out for sure the linkage is the only thing broken before spending ANY money. Because if it isn't and one of the capsules are damaged and or one of the runners inside manifold are effed then you're gonna be salty.
Guided test ftw!
Guided test ftw!
05-12-2016, 06:36 PM
#5
Newbie
Thread Starter
Join Date: Apr 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
1995 c280
Error code: P2004. Diagnosis of Tumble Flap "intake manifold" Short Circuit to ground of sensor lines/Tumble Flap shaft sticks in actuated position.
This is a 09 E350 with 56k miles.
This is a 09 E350 with 56k miles.
05-13-2016, 09:51 AM
#6
MBWorld Fanatic!
Visually inspected tumble flaps and verify they are in fact broken. IF they aren't you will need to process fault code.
