W211 airmatic block valve block diagram and how to pull the air host toward valve
Thread Starter
Junior Member
Joined: Jan 2022
Posts: 24
Likes: 2
2005 E320
W211 airmatic block valve block diagram and how to pull the air host toward valve
Dear all,
I have MB 2004 E500. My front two wheels are sinking because of a leaking airmatic block valve: I can hear SSSSSS noise from the the block valve area and the car front wheel can pump up when it is driven.
The front wheel airmatic hose having cracks and I want to cut the crack portion off and connect the hose the valve. However, it hoses are short. I can NOT pull the hose valve and connect to the valve.
Does anyone knows how to pull out the hoses and have the airmatic hose layout/routing diagram so I can pull the hose out? I can see hose at the top, still have room to be pulled.
Thanks for your help!
I have MB 2004 E500. My front two wheels are sinking because of a leaking airmatic block valve: I can hear SSSSSS noise from the the block valve area and the car front wheel can pump up when it is driven.
The front wheel airmatic hose having cracks and I want to cut the crack portion off and connect the hose the valve. However, it hoses are short. I can NOT pull the hose valve and connect to the valve.
Does anyone knows how to pull out the hoses and have the airmatic hose layout/routing diagram so I can pull the hose out? I can see hose at the top, still have room to be pulled.
Thanks for your help!
Last edited by deyuzhou; May 31, 2022 at 01:43 PM.
