P0102, P0113 on E 350
Thread Starter
Newbie
Joined: May 2022
Posts: 3
Likes: 0
W211 E350
P0102, P0113 on E 350
Hey guys, got a 153,000 mile 08 E 350 with a CEL. Got the following codes:
Primary
P0102 - Mass Air Flow sensor “A” circuit low
Secondary
P0101 - Mass Air Flow circuit range/performance
P0113 - Intake air temperature sensor 1 circuit high input
I already replaced the MAF with a Bosch unit from FCP euro, codes still persist.
Car runs fine, MPG is normal, if not better than before!
These codes came on while normally driving in 20 degree chicago weather. Car was running fine before it got cold here.
I will admit, i let the car warm up to around 60 degrees C on the dash when i started driving. Not sure if i broke something by not letting it warm up properly.
Primary
P0102 - Mass Air Flow sensor “A” circuit low
Secondary
P0101 - Mass Air Flow circuit range/performance
P0113 - Intake air temperature sensor 1 circuit high input
I already replaced the MAF with a Bosch unit from FCP euro, codes still persist.
Car runs fine, MPG is normal, if not better than before!
These codes came on while normally driving in 20 degree chicago weather. Car was running fine before it got cold here.
I will admit, i let the car warm up to around 60 degrees C on the dash when i started driving. Not sure if i broke something by not letting it warm up properly.
