Front suspension / axle work
Thread Starter
Junior Member
Joined: May 2023
Posts: 54
Likes: 5
S211 E320 4-matic
Front suspension / axle work
I need to replace my front CV boots. Not a job I am looking forward to, but now that I have to, I want to replace any parts that are within reach on the front suspension. My E320 4-matic has 160k miles.
"Don't fix if it ain't broken" has my preference, but I also want to avoid having to take of the brakes again in the next 2 years to replace some 50$ parts.
I already decided to replace discs & brake pads. And probably the ball joints and shocks. And if needed the wheel bearings. Perhaps also the tie rods / tie rod boots.
Any other bushings, bearings or other parts I should consider replacing while the wheels and brakes are off?
"Don't fix if it ain't broken" has my preference, but I also want to avoid having to take of the brakes again in the next 2 years to replace some 50$ parts.
I already decided to replace discs & brake pads. And probably the ball joints and shocks. And if needed the wheel bearings. Perhaps also the tie rods / tie rod boots.
Any other bushings, bearings or other parts I should consider replacing while the wheels and brakes are off?
MBWorld Fanatic!
Joined: Aug 2023
Posts: 3,706
Likes: 1,119
From: MA Coast
W204 2010 C300 4matic Sport M272
I dont have a W211 but came across an informative thread when researching how to do the boots on my W204. Seems this person hardly disconnected anything, looks pretty easy.
https://mbworld.org/forums/e-class-w...pictorial.html
https://mbworld.org/forums/e-class-w...pictorial.html
MBWorld Fanatic!
Joined: Jun 2014
Posts: 1,086
Likes: 443
From: Melbourne, Australia
2010 ML550 VIN WDC1641722A564750, 2010 B180
Youd be wise to have a good look at all the bushings. These make a huge difference to ride quality. Some are easy to do such as sway bar bushings and the sway bar links at each end - they're also relatively inexpensive. Have a good look at your upper and lower control arm bushings as well. If you have to change them, especially the lower arm bushings, save yourself the headache and buy a replacement arm, not just the bushings.
