Front brake job any differnt than rear? e350 4matic
Thread Starter
Member
Joined: Sep 2012
Posts: 154
Likes: 29
From: MA
e350 4matic wagon 2009
Front brake job any differnt than rear? e350 4matic
w211 2009 E350 4matic Wagon, 153K mi
Getting ready to do front brakes. Not sport package. I did rear a few years ago. I've read / watched what videos are available which weren't as detailed as the rear brake video I followed from FCP Euro. I believe I have the torque specs (listed below).
QUESTION: Are there any differences between the front and rear? Anything to watch out for that are front specific?
Thanks for any input
Torque values I have:
Caliber bracket bolts 85 ft-lbs
Caliper pin bolts 25 ft-lbs
Bleeder screw 10 ft-lbs
Lug botls 95 ft-lbs
Rotor set screw 10 Nm
Getting ready to do front brakes. Not sport package. I did rear a few years ago. I've read / watched what videos are available which weren't as detailed as the rear brake video I followed from FCP Euro. I believe I have the torque specs (listed below).
QUESTION: Are there any differences between the front and rear? Anything to watch out for that are front specific?
Thanks for any input
Torque values I have:
Caliber bracket bolts 85 ft-lbs
Caliper pin bolts 25 ft-lbs
Bleeder screw 10 ft-lbs
Lug botls 95 ft-lbs
Rotor set screw 10 Nm
Thread Starter
Member
Joined: Sep 2012
Posts: 154
Likes: 29
From: MA
e350 4matic wagon 2009
w211 2009 E350 4matic Wagon, 153K mi
Getting ready to do front brakes. Not sport package. I did rear a few years ago. I've read / watched what videos are available which weren't as detailed as the rear brake video I followed from FCP Euro. I believe I have the torque specs (listed below).
QUESTION: Are there any differences between the front and rear? Anything to watch out for that are front specific?
Thanks for any input
Torque values I have:
Caliber bracket bolts 85 ft-lbs
Caliper pin bolts 25 ft-lbs
Bleeder screw 10 ft-lbs
Lug botls 95 ft-lbs
Rotor set screw 10 Nm
Getting ready to do front brakes. Not sport package. I did rear a few years ago. I've read / watched what videos are available which weren't as detailed as the rear brake video I followed from FCP Euro. I believe I have the torque specs (listed below).
QUESTION: Are there any differences between the front and rear? Anything to watch out for that are front specific?
Thanks for any input
Torque values I have:
Caliber bracket bolts 85 ft-lbs
Caliper pin bolts 25 ft-lbs
Bleeder screw 10 ft-lbs
Lug botls 95 ft-lbs
Rotor set screw 10 Nm
Nope. No different, same procedure.
