Cool/Useful features that I didn't know about
#276
I dont know whether this was mentioned in the original "did u know" stuff,
but what is really cool is the keyless go function,or maybe its on all the E's I dunno,,with the key in ur pocket,just grabbing a door handle or the trunk release and boomff,,opens,,,AND to lock the doors a slight touch with the back of your hand,,,truly cool.
but what is really cool is the keyless go function,or maybe its on all the E's I dunno,,with the key in ur pocket,just grabbing a door handle or the trunk release and boomff,,opens,,,AND to lock the doors a slight touch with the back of your hand,,,truly cool.
#277
MBWorld Fanatic!
Joined: Aug 2003
Posts: 1,138
Likes: 7
From: NY
2014 E550 4matic,, sold 2012 E 350 4matic,,sold 2010 e350 4w,sold 2002 e320 se
If it wasnt for me living with her,, all of her VCR's would be blinkin 12:00
Last edited by stemags; 11-15-2011 at 08:28 PM. Reason: bad grammar
#278
#279
MBWorld Fanatic!
Joined: Jun 2009
Posts: 1,800
Likes: 12
1953 300 Adenauer, 1971 300 SEL 6.3, 1975 600, 1978 450 6.9
You still have VCRs? I guess that's why you're driving a MB and not a BMW
#280
MBWorld Fanatic!
Joined: Oct 2010
Posts: 4,553
Likes: 942
From: Southern US
2010 E550, 273 Engine: 2012 S550, 278 Engine
My car locks work with standard jeans on so it should cover pretty much all normal clother we wear.
#281
funny enough, i have this feature on my W211 but it didn't work on the W212. I thought it was disabled. so, what am i doing wrong?
#282
Actually, if u get into the red rev zones, the transmission will upshift to prevent damage. it just holds the gear for as looooooong as possible. still, pretty cool tho. ensures u have lots of power available everytime until u put it back in 'D' by holding the right paddle shifter.
#283
A "not so cool" feature I found, you actually CAN lock your keys in the car (P2) with the key fob in the car. I always heard you couldn't, but discovered that if you leave the fob in the car, close the trunk from trunk/lock button in the trunk (part of P2), it will lock all doors. I typically don't take my keys out of my pocket and place them in the car, so I am lucky I had a spare key in my office. Whew...
#284
Opening hood
The springs open the hood to a normal inclined position, if you push the hood it will open further to an almost vertical position. Makes it a lot easier to access things at the back of the engine.
Peter
Peter
#286
Member
Joined: Apr 2007
Posts: 239
Likes: 49
From: Richmond, Virginia USA
'12 E550, '10 ML350, '06 E350, '20 GLC300, '21 GLC300
When backing up slowly into a parking spot, if I open my door, the car brakes and goes into Park instantly. Caught me by surprise. But not on my buddies'2010 model e350. Is it on yours?
Posted from Mbworld.org App for Android
Posted from Mbworld.org App for Android
#287
Yup, mine does that , it grinds into halt if I open the driver's door when backing up slowly .
#288
Super Member
Joined: Feb 2012
Posts: 573
Likes: 5
From: Los Angeles
'19 MBZ E450 Wagon, '19 BMW 530e
When the car starts to oversteer while you are dialing in some countersteer. ESP will kick back in and your seatbelt will tighten up immediately as if you are about to crash.
I found that out during some fun canyon carving action.
I found that out during some fun canyon carving action.
#289
Member
Joined: Apr 2007
Posts: 239
Likes: 49
From: Richmond, Virginia USA
'12 E550, '10 ML350, '06 E350, '20 GLC300, '21 GLC300
What and how do you "dial in countersteer"?
#290
Super Member
Joined: Feb 2012
Posts: 573
Likes: 5
From: Los Angeles
'19 MBZ E450 Wagon, '19 BMW 530e
#291
MBWorld Fanatic!
Joined: Oct 2010
Posts: 4,553
Likes: 942
From: Southern US
2010 E550, 273 Engine: 2012 S550, 278 Engine
Reset PCM.
1. Sit on the driver's seat and close the door.
2. While keeping your feet off the pedals Turn key to position 2 (or press the start button twice on P2 cars). DO NOT start the car.
3. Floor the gas pedal and hold it in for 10 seconds.
4. While holding the gas pedal in turn key to position 1 (or press the start button once on P2 cars).
5. Release gas pedal and wait 2 minutes. Do not open door, just wait. Time it!
The actual time in my car is about 1 min 45 seconds. I know this as the speedo cluster lights up.
6. Turn key off.
7. You have just done the PCM reset. Go drive and you will see what it does.
1. Sit on the driver's seat and close the door.
2. While keeping your feet off the pedals Turn key to position 2 (or press the start button twice on P2 cars). DO NOT start the car.
3. Floor the gas pedal and hold it in for 10 seconds.
4. While holding the gas pedal in turn key to position 1 (or press the start button once on P2 cars).
5. Release gas pedal and wait 2 minutes. Do not open door, just wait. Time it!
The actual time in my car is about 1 min 45 seconds. I know this as the speedo cluster lights up.
6. Turn key off.
7. You have just done the PCM reset. Go drive and you will see what it does.
Last edited by Arrie; 04-16-2013 at 12:23 AM.
The following users liked this post:
Dr. Gonzo (11-22-2020)
#293
Senior Member
Joined: Apr 2012
Posts: 465
Likes: 5
From: Southern California, Orange County
2012 E350
Don't know if this has already been mentioned, but for Pre-2013 w212s, at the back of the trunk there is a secret storage. Just lift up the trunk cover(the one where u access your wheel), there should be a small hidden space that you can put things there. Underneath that is the spare wheel. I just put jumper cables there and it fits perfectly and out of sight.
#294
Don't know if this has already been mentioned, but for Pre-2013 w212s, at the back of the trunk there is a secret storage. Just lift up the trunk cover(the one where u access your wheel), there should be a small hidden space that you can put things there. Underneath that is the spare wheel. I just put jumper cables there and it fits perfectly and out of sight.
#295
Reset PCM.
1. Sit on the driver's seat and close the door.
2. While keeping your feet off the pedals Turn key to position 2 (or press the start button twice on P2 cars). DO NOT start the car.
3. Floor the gas pedal and hold it in for 10 seconds.
4. While holding the gas pedal in turn key to position 1 (or press the start button once on P2 cars).
5. Release gas pedal and wait 2 minutes. Do not open door, just wait. Time it!
The actual time in my car is about 1 min 45 seconds. I know this as the speedo cluster lights up.
6. Turn key off.
7. You have just done the PCM reset. Go drive and you will see what it does.
1. Sit on the driver's seat and close the door.
2. While keeping your feet off the pedals Turn key to position 2 (or press the start button twice on P2 cars). DO NOT start the car.
3. Floor the gas pedal and hold it in for 10 seconds.
4. While holding the gas pedal in turn key to position 1 (or press the start button once on P2 cars).
5. Release gas pedal and wait 2 minutes. Do not open door, just wait. Time it!
The actual time in my car is about 1 min 45 seconds. I know this as the speedo cluster lights up.
6. Turn key off.
7. You have just done the PCM reset. Go drive and you will see what it does.
Pardon my ignorance, but what is PCM you are resetting?
#296
MBWorld Fanatic!
Joined: Oct 2010
Posts: 4,553
Likes: 942
From: Southern US
2010 E550, 273 Engine: 2012 S550, 278 Engine
It is Powertrain Control Module, PCM.
These cars, at least 2010 and 2011 models, have a "smart" transmission that learns your driving habits. As I drive a lot on highways my car learns me as a grandma very quickly and becomes very "unsporty" to drive. With this reset it returns car behavior back to a sports car.
#298
Driver's side only in the US too
Is it just mine, or does the rear cabin for your W212's also only have 1 climate control zone. I could have sworn the generation before had 2 rear climate zones.
ALSO, did USA get the option for the dynamic contour/massage seat for the passenger side? Because in Canada you can only get it for the driver seat.
ALSO, did USA get the option for the dynamic contour/massage seat for the passenger side? Because in Canada you can only get it for the driver seat.
#299
Hard to blame Mercedes-Benz for that when our idiot politicians monkey with the dates for the change between standard and daylight savings time.
#300
Reset PCM.
1. Sit on the driver's seat and close the door.
2. While keeping your feet off the pedals Turn key to position 2 (or press the start button twice on P2 cars). DO NOT start the car.
3. Floor the gas pedal and hold it in for 10 seconds.
4. While holding the gas pedal in turn key to position 1 (or press the start button once on P2 cars).
5. Release gas pedal and wait 2 minutes. Do not open door, just wait. Time it!
The actual time in my car is about 1 min 45 seconds. I know this as the speedo cluster lights up.
6. Turn key off.
7. You have just done the PCM reset. Go drive and you will see what it does.
1. Sit on the driver's seat and close the door.
2. While keeping your feet off the pedals Turn key to position 2 (or press the start button twice on P2 cars). DO NOT start the car.
3. Floor the gas pedal and hold it in for 10 seconds.
4. While holding the gas pedal in turn key to position 1 (or press the start button once on P2 cars).
5. Release gas pedal and wait 2 minutes. Do not open door, just wait. Time it!
The actual time in my car is about 1 min 45 seconds. I know this as the speedo cluster lights up.
6. Turn key off.
7. You have just done the PCM reset. Go drive and you will see what it does.
I tried it 3 times..cluster never lit up for me. I have '10 p2 package.