tire pressure on aftermarket wheels/tires

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Dec 21, 2011 | 07:18 PM

ronjavier

Thread Starter

Junior Member

Joined: May 2011

Posts: 22

Likes: 0

e350 sport sedan

tire pressure on aftermarket wheels/tires

I got TSW's (Mallory5 matte black) with Michelin Pilot Sport AS Plus this past summer. Front is 245/35-19 and rear is 285/30-19. They were installed with about 3psi more than recommended (sticker on door jamb). Anyone know how to determine or calculate the correct setting?

Attached Thumbnails

tire pressure on aftermarket wheels/tires-p1010807.jpg

Last edited by ronjavier; Dec 21, 2011 at 08:01 PM. Reason: add photo

Dec 21, 2011 | 08:07 PM

CEB

MBWorld Fanatic!

Joined: Jun 2009

Posts: 1,800

Likes: 14

1953 300 Adenauer, 1971 300 SEL 6.3, 1975 600, 1978 450 6.9

Quote:

Originally Posted by ronjavier

There is no real "correct" setting for every situation. Even using stock sizes, the door jamb an approximation and the "correct pressure depends on loading, speed and tire/tread design.

The door jamb info is a good starting point. You can add air in 1 or two psi increments and see at what point you find the handling/comfort level to be suitable.

Don't decrease the psi by more than about 10% from the door jamb level and don't increase it by more than about 15%

Dec 28, 2011 | 01:57 AM

ronjavier

Thread Starter

Junior Member

Joined: May 2011

Posts: 22

Likes: 0

e350 sport sedan

Thanks, I appreciate the response. Unless you say otherwise, I'll assume the heavier the load, the higher the psi.

Dec 28, 2011 | 06:38 AM

bigigg

MBWorld Fanatic!

Joined: Sep 2008

Posts: 1,700

Likes: 0

From: Bergen Co,NJ

14' CLS550

Nice wheels! I recall using 40 psi in my aftermarket wheels.. the door jamb doesnt apply to aftermarket wheels, altho its very close. Try 40psi and see how you like the ride.