E-Class (W212) 2010 - 2016: E 350, E 550

Flat hood emblem question

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-04-2012 | 10:26 PM
  #1  
pining_garcia's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2009
Posts: 30
Likes: 0
'11 E350 - P2, MM, Pano roof, PDC; '07 ML350 - Nav, '19 rims; '08 BMW 550i - fully loaded!
Flat hood emblem question

Hey guys! Will a flat hood emblem of a w204 fit w212? I called the dealer today and they said that they'd have to put it on and see. They only have emblems for the C-class. Also, I have lug nuts that came off of a w204, would that fit on w212? I saw some vendors on ebay selling lug nuts and claims that it'll fit the w204 and w212. Thanks!
Old 03-24-2012 | 08:58 PM
  #2  
aqsc815616's Avatar
Junior Member
 
Joined: Feb 2009
Posts: 61
Likes: 0
09 C63, 12 E350 4M
+1 for this thread....want to know also
Old 03-24-2012 | 11:41 PM
  #3  
Pntblnk's Avatar
Super Member
 
Joined: Jan 2011
Posts: 597
Likes: 23
From: Nashville
2017 S550 Iridium / Black Nappa, 2015 GL 550 Paladium Silver
It will fit, but not perfectly and may cause damage to the paint around the edges. Purchased one in hopes of making it work and just didn't like the fit at all. There are several sellers on the board that make pretty good replacements and guarantee to fit.
Old 03-25-2012 | 07:29 PM
  #4  
OAG's Avatar
OAG
Junior Member
 
Joined: Jan 2010
Posts: 54
Likes: 0
From: Central Ohio
E350 LUX 4M P2 D+
Used one (C-Class) about 2 years ago on my E-350 Lux MY 2010. Fit just fine with no damage to paint - I switch them out once in a while. I did shim it with a little rubber electrical tape on the bottom left and right sides to make it fit snug. Cost was about $25 with proviso I could return it for a refund if I was not happy with it. Don't have MB part # handy right now.
Old 03-25-2012 | 08:45 PM
  #5  
MCF's Avatar
MCF
Super Member
 
Joined: Sep 2010
Posts: 672
Likes: 1
E350
Search this forum....there are plenty of flat emblems that fit perfectly. I have one.
Old 03-26-2012 | 07:47 AM
  #6  
CorvetteOJ's Avatar
Member
 
Joined: Sep 2011
Posts: 117
Likes: 1
From: Montgomery, Alabama
2011 E-350
I ordered mine from Amazon .com. It fits like a glove and looks factory. You need a 45 mm diameter badge to fit the indentation perfectly.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Flat hood emblem question



All times are GMT -4. The time now is 05:47 AM.